All Activity

Jeremiah is a cool dude. I message him frequently...actually talked with him today. Just a warning...you better do this car right or I'll hunt you down. I actually had first dibs on this car but I already have an STE and therefor told Jeremiah that I just couldn't pull the trigger on it. I don't have the time and space for another one otherwise I'd be talking it on. This car deserves to be restored and preserved and you sir have a unicorn of a car. I'm here to help find parts and such and will help in any way to get it good again. Just ask.

Yes sir. I had first dibs on the car but decided against it since I've already got my dream STE.

Greg knows this car.

Wait @jiggity76Was this sedan owned by that guy you know?

You should run the vin for it by @ManicMechanicand he can tell you everything about that specific car

Jumping in here because after 20+ years, I wanted to get back into the W-body game, and specifically wanted a 3.4 5-speed. I found a 1991 4 door GP in minnesota (im sure many saw the gentleman selling 9 W bodies on facebook) and decided to pull the trigger. How bad of a mistake did I just make if the car isnt rusty? 447387533_432201872921982_8397251001160634927_n.mp4

So, no one has a clue what this is? One good thing that I’ve learned is that Rock Auto carries a headliner (see, I found out what the piece that covered the ribs is called, LOL) for these cars, will be ordering one.

Not really sure whats being asked here... Can we get a little bit better of a post so we know what you are after?

I'm very interested in purchasing a dome light assembly, can you please let me know if these are still available due to the age of the post and also is it possible to send me a picture so I can see exactly what they look like and hoping they will work for my 93 Cutlass Supreme Vert. Thank you for keeping these vehicles up and running and the ability to find "discontinued parts".

Hey there guys, just had the top on my 1993 vert replaced. Since the piece the covered the workings of the top ( like the inside ribs) had pretty much rotted, this is the first time I’ve ever seen the bottom of the top. There are two metal hook like pieces on either side of the top back behind the back windows that I have no idea what they are or where they should go. Any ideas? Thanks

I just did this job and I relocated the module in the trunk. It's now velcroed on the inner fenderwell. There is plenty of wiring and the module can be hidden under the trunk carpet. Now when the next time it fails it will be a 10 minute job instead of a real headache

Define "tried everything". WHAT did you "try"? What were the results? Yes, a shop can connect a scan tool to diagnose the problem. When it was MY W-bodies, the sensor wires were corroded, the sensor harness from wheel to chassis needed to be replaced. In other cases, the sensor may be bad, or the wheel hub. There are other potential problems that will require other solutions. That's why it needs to be diagnosed with the scan tool. When was the last time the brake fluid was flushed through the ABS unit using a scan tool to actuate the valves?

WHY does your car need a "k frame"? What is actually wrong with it?

Looking into getting mine in order. Probably only needs forward k frame? Probably doesn't need to be turbo. Need a donor possibly. Looking at options been out of the game so don't know current values. Also was my understanding a McLaren was fully optioned. I can't find any with moon roof or leather. I don't think one better optioned than mine exists. So I don't know what to do as far as donors

I have an 1994 Oldsmobile Cutlass Supreme S 3.1 with the same issue and been having it for years even with brakes I have tried everything to get this ABS lights to go out Could a shop check my ABS sensor to see if it could be cleaned?

Thank you thank you for yours and everyone’s help. It is greatly appreciated. I had no idea there was a Facebook tgp group. I will be checking that out thoroughly. Anyway here’s a picture of my old Grand Prix. It was the reason I even knew about the tgp. I thought I knew everything about gp’s at one time. But I didn’t and still don’t. 69 sj I still regret selling it.

Found on a Pontiac forum.

These were posted on the Shitty Years Pontiac forum today.

There are 4 separate pieces per side for a total of 8 pieces for both sides of the car underneath the rocker panel or floor pan areas for structural support. I'm assuming these are the pieces or areas that you're referring too? None of them are available anymore or will be easy to find as separate pieces that can be purchased. They'll need to be fabricated or somehow swapped from a donor car that is of course not rusted or rotted. A rust free parts car or junkyard car will be your best friend here if you don't want to have someone make them.

The strip I have on my '93 Cutlass convertible is rusted and bulging. Can it be replaced? How difficult is the job? Where can I buy the part? This is the way it was described to me... "The heavy-duty metal strip you are describing on your 1993 Oldsmobile Cutlass convertible is likely a structural reinforcement plate or subframe connector. These components are designed to enhance the rigidity and strength of the vehicle's frame, especially in convertible models where additional support is needed due to the lack of a fixed roof. The series of bolts hold this reinforcement plate securely in place, attaching it to the car's subframe and rocker panels. Over time, these parts can rust, particularly in older vehicles."

Thanks for your extensive input on this subject, I'll continue to follow your updates. I also just started a new question regarding rocker panel reenforcement strips for my '93 convertible. If you happen to have any thoughts on that too. Thanks again.

The strip I have on my '93 Cutlass convertible is rusted and bulging. Can it be replaced? How difficult is the job? Where can I buy the part? This is the way it was described to me... "The heavy-duty metal strip you are describing on your 1993 Oldsmobile Cutlass convertible is likely a structural reinforcement plate or subframe connector. These components are designed to enhance the rigidity and strength of the vehicle's frame, especially in convertible models where additional support is needed due to the lack of a fixed roof. The series of bolts hold this reinforcement plate securely in place, attaching it to the car's subframe and rocker panels. Over time, these parts can rust, particularly in older vehicles."

You're talking about the "cigarette lighter" sockets? They're supplied with power and ground, if either or both are non-functional, the socket won't work. Obtain the wiring diagram for them from the service manual set for your vehicle. I buy 'em used, from sellers on eBay.

Does anyone have the actuator nee or used in working condition for sale 24503860 part number

My 12 volt plugs in my 2006 pontiac grand prix gxp are not working. I have checked fuses and they are all fine. The plug on the outside of the console doesn't work neither does the one inside? Anyone have a solution to my problem?