Leaderboard

Dont encourage me, I really only know what I`m talking about at best 30% of the time. From what I`m reading in the FSM is recommended to rehome the motors of the ABS system with the Tech1 before flushing and bleeding. Its possible to do without a scan tool but only if no DTCs are present. Start the engine and watch the ABS light on the dash, if it doesnt go out after about 10 seconds you have an issue with your brakes and will need a scan tool or get lucky fixing the issue. If it does go out after a few seconds turn the engine off and do it all over again without pressing on the brake pedal. The FSM states the system is ready to be bled now.