Leaderboard

It had to be saved, it was going to the Jawas otherwise. All Jiggity57`s fault for posting it. I got into a bit of a race the other day when I probably shouldnt have. I made a right turn and immediately found a speeding BMW attempting to swerve around me from a sharp corner in the right lane. I laid into the pedal a bit, chirped the tires and heard an awesome turbo wastegate PAHHTISHHHHH and left the kraut cart far into the rearview mirror. Scared the hell out of me and blew the lower hose off the turbo in the process. I love this freakin` car! Decades after WW2 and we can still put the Messerschmitt`s in their place, just not in a P51 Mustangs.

Little update, we got it tuned pretty good just having trouble making boost. Fixed a couple leaky intercooler pipes and it takes forever to build boost. Thinking maybe the 2 1/2 is too big for the turbo piping, probably will go to 2 inch. We have cam to put in which will help aswell. More vids coming soon

You're welcome.

Pics? Though Ive got a feeling I know the part being referred too. IIRC its called run channel if its the slotted piece the glass makes contact with on the sides of the "window regulator". It could "possibly" be some universal stuff that solidified over time that just looks like plastic. Hey is this at the front A pillar side of the glass near the mirrors or against the rear part of the door glass closer to the handle? I`m thinking of 2 different parts now.

Yep

did you all still want a picture of it installed?

OK kiddies, like the title says, is it possible to use the entire front sub frame and suspension in to a 1.5 lumina? I measured the front upper strut mounting bolts and it looks like the pattern is the same.

Incase anyone searches and wants the answer to this.... Yes it possible to bolt a 2nd gen subframe to the 1st gen. However there is some Modification needed to the front mounting bolts and some spacers needed to lower the subframe height. Miko k did the swap into his old 96 cutlass. He detailed it in his thread in the members ride section.

Yes can be done. -3800 motor and trans from a w-body(mounts are different between the different chassis. Just makes it easier). -Inner tulip cv joint from Same trans out axle from 1g w -Wiring harness 98-99 Monte Carlo/lumina ltz, need to mod c100 conector but easy enough -downpipe from same monte/lumina -power steering lines from monte/lumina -heater core lines from Monte/lumina -rad and hoses from 3800 car Motor will drop right into the subframe and into the car no issues. You can use the 2g wiring but you're into more wiring of the c100 connector as they're completely different.

Gen1 control arms are bolted to the K frame, and our struts are martian. Swapping the Gen2 frame, doesn't that mean that the whole suspension has to be reworked? I remember Miko's car... that thing was all modded up.

You can bolt the 2nd gen subframe in a 1st gen w-body, I've done it... Suspension becomes a headache though...

Aluminum subframe was 06+ only...

so will the Aluminum cradle fit gen 1 and 1.5 cars?