Drummer Posted July 8, 2014 Report Share Posted July 8, 2014 (edited) My quick disconnect connector for the cooler line that go into the transmission is leaking. Is there an o-ring inside that I can replace or do i have to replace the whole connector? Where can I get one at? Edited July 8, 2014 by Drummer Quote Link to comment Share on other sites More sharing options...
Cutlass350 Posted July 9, 2014 Report Share Posted July 9, 2014 You likely need a new fitting: http://www.amazon.com/ACDelco-24236554-Transmission-Fitting-Assembly/dp/B0049OKZDA http://www.rockauto.com/dbphp/x,catalog,337,partnum,24236554,d,ACDELCO_24236554.html How to replace the fitting: Nice tool to make it easy to remove the hard line from the quick connect line, without having to remove the PITA clip: http://www.amazon.com/OTC-7937-Transmission-Cooler-Disconnect/dp/B000OCIWR2/ref=cm_cr_pr_product_top If the end of the hard line is bad: http://www.amazon.com/Hayden-Automotive-397-Transmission-Fitting/dp/B000EPRCAC Good Luck! Quote Link to comment Share on other sites More sharing options...
Leadfoot Posted July 9, 2014 Report Share Posted July 9, 2014 I just replaced the o-ring on mine and it fixed the problem. That is not always the case, but is a cheap simple start to the solution Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.