Jump to content

Recommended Posts

Posted

I need to replace the rear brake lines on my '98 Lumina ls, from the drivers door back. Is it 3/16" brake line i need to pick up? They do not sell it in rolls anymore so i have to buy it separate in different lengths and connect them together. so it makes it much harder to do dammit.

Posted

i believe it's 3/8, not 3/16, but it's been a year or so since i've blown a line, so i'm not entirely sure.

Posted

3/16 with metric bubble flare fittings

  • 15 years later...
Posted

Hi, replacing my sons 1998 Lumina with a little over 250,000 miles on it rear brake lines found some 25' 3/16 kits with fittings online I have a line bender and cutter and a flare kit ,, replacing rear lines this weekend hoping its 3/16 as posted. I'd get rid of it but that 3.1 just runs like a top and the trans is still smooth. I've rebuilt all four corners and a handful of other items over the years but its a former grandparent car so it was well maintained and we have done the same.  This series of 3.1 3.8 V6 chevy cars was almost bullet proof I still see a ton of Luminas, Monte Carlos, Corsica's on the road and setting on driveways.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...