tornado_735 Posted July 19, 2009 Report Share Posted July 19, 2009 I'm starting to get some groaning out of the rear wheel bearings. When I did my brakes a few months back, I was looking at the whole hub/bearing, and they didn't look too hard to replace. Is it really as easy as it looks? Quote Link to comment Share on other sites More sharing options...
GutlessSupreme Posted July 19, 2009 Report Share Posted July 19, 2009 well, I tried removing them with the knuckles in a vise... I rounded off one bolt per side in the process, and the hubs were so rusted stuck to the knuckles that I ended up destroying a perfectly good original bearing in the process so needless to say I didn't continue trying with the other side.. soak the bolts and all around the hub/knuckle with PB blaster for a few days, loosen it all up really well before attempting it. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.