sethstorm Posted September 21, 2005 Report Share Posted September 21, 2005 I've been looking to replace the wheels currently on the car, and was wondering how much of an issue it'd be to go with 40mm offset 16x7 wheels compared to the current stock 38mm wheels? If these would fit with no real issues, then I could go with stock sized tires - or have to go up/down to get a good fit (for the width as not to have anything rub the car)? Quote Link to comment Share on other sites More sharing options...
pwmin Posted September 21, 2005 Report Share Posted September 21, 2005 91 regals have 38mm offset? guess i didnt know that. 2mm's is not going to make any difference (well obviously 2mm's but that's so small, it's almost invisible to the naked eye ) Quote Link to comment Share on other sites More sharing options...
sethstorm Posted September 22, 2005 Author Report Share Posted September 22, 2005 I've been searching the forums, and saw more or less not to go more than 42mm, and it seems to be almost the same with respect to offset on 88-96 (could be wrong) based on what I'm hearing from recommendations - just havent heard much here on the Regal. Right now I'm just looking to find what measurements I can fit on there (and hopefully not need spacers - as the current set are about to fall off, and I'm not wanting to go through that again). Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.