W_bodylover Posted August 11, 2005 Report Share Posted August 11, 2005 Does anyone have any write up's on how to convert Sedan GP lights to Coupe GP lights for the averge joe like myself? Quote Link to comment Share on other sites More sharing options...
92 GP Posted August 11, 2005 Report Share Posted August 11, 2005 it wouldn't even be that hard man. Pop open your trunk, pull that back carpeting off. There are some 10mm IIRC nuts holding the taillights onto the shell, unscrew them after taking out the lights (remembering which lights went where. Just remember the color of the wires, like green=brake/tailight, etc) Pull off the assemblies. Pop in the new coupe assemblies, that were removed the exact same way. Screw them on, put the bulbs in corresponding holes Quote Link to comment Share on other sites More sharing options...
jeremy Posted August 11, 2005 Report Share Posted August 11, 2005 are you trying to swap the headlights or the taillights? Quote Link to comment Share on other sites More sharing options...
W_bodylover Posted August 12, 2005 Author Report Share Posted August 12, 2005 Tails...i heard that there had to be some extending of some wires or something like that.. Quote Link to comment Share on other sites More sharing options...
digitaloutsider Posted August 12, 2005 Report Share Posted August 12, 2005 Seeing as how you have a 1990, do you have an STE and want the non-reversed taillights, or do you the base (NOT SEDAN SPECIFIC) non-checked taillights and want those? Quote Link to comment Share on other sites More sharing options...
W_bodylover Posted August 12, 2005 Author Report Share Posted August 12, 2005 I don't have a 90 or any Year as of yet. but the year i was reffering to was the 94-96 models. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.