j_mezz Posted September 28, 2011 Author Report Posted September 28, 2011 This is the place to come for that, PM sent. Quote
DB3894 Posted October 9, 2011 Report Posted October 9, 2011 Probably the wrong place to start so forgive me. Saw dome light and I'm looking for the for the light. Any suggestions? Quote
j_mezz Posted October 10, 2011 Author Report Posted October 10, 2011 Well...it's not a bad place to start. Do you have anything to start with or do you really need everything? Quote
Aron Nance Posted October 14, 2011 Report Posted October 14, 2011 Mezz: I need another set for back u (and also broke one bulb on installation). You still have another 2 switches/4 bulbs available? Will post payment on Ebay (give me place to send, again) when I get your reply. And once again, thanks for your efforts! Aron:thumbsup: Quote
Aron Nance Posted October 25, 2011 Report Posted October 25, 2011 Jim: Got 'em! Thanks for the xtra bulb!! Aron Quote
oldsfever Posted November 10, 2011 Report Posted November 10, 2011 I know it's been a while but are there any switches left? Or doess anyon e know where I can get a pair? Thanks. Quote
oldsfever Posted November 11, 2011 Report Posted November 11, 2011 I need a set. could you email me at kenron01@verizon.net? Thanks. Quote
oldsfever Posted November 14, 2011 Report Posted November 14, 2011 Thanks for the reply. I've sent you the money and an email with my address. Quote
oldsfever Posted November 19, 2011 Report Posted November 19, 2011 I got the switches and bulbs today. I installed them and it worked like a charm. That is very cool. I've known others that have spent a lot of money replacing the complete assembly only to have the switches burn out again. Thanks, again. This was a great deal. Quote
iamuncreative Posted February 26, 2012 Report Posted February 26, 2012 If you've still got them, I'll take a set of each. Quote
j_mezz Posted March 1, 2012 Author Report Posted March 1, 2012 Still got 'em Uncreative, and your's went out today. Love that screen name! Quote
mchill07 Posted March 2, 2012 Report Posted March 2, 2012 (edited) I would like a set myself. looking a previous posts, I assume they are $8 per pair plus $3 shipping If you still have some. Just give me the papal info and i'll send the money. Edited March 2, 2012 by mchill07 Quote
j_mezz Posted March 3, 2012 Author Report Posted March 3, 2012 Cool, got ur paypal. I'll try to get them out tomorrow. Shipping had been pegged at $2.50 for a Long time but I'm finally breaking down and bumping it up to $3.00. Quote
Topbiker49 Posted March 15, 2012 Report Posted March 15, 2012 I successfully lobbied the original manufacturer of dome light switches to re-manufacture some switches for me. I ordered a couple of hundred and they just showed up today. $8 a pair plus shipping ($2.50). It's probably just my cars they broke on, right? I'll post a picture tomorrow night. 7/28/11 update - Acting on a tip from another W-bodier I picked up some LED bulbs that fit right into the original housing. These eliminate the heat buildup that causes the switches to go bad. I can provide a set of 4 for $12. I would like a set of switches and bulbs if still available. Thanks Quote
j_mezz Posted March 21, 2012 Author Report Posted March 21, 2012 Yes, Shipping is now $3 though. PM sent Quote
1994RedVert Posted May 1, 2012 Report Posted May 1, 2012 Do you still have two switches and 4 bulbs? Quote
j_mezz Posted May 7, 2012 Author Report Posted May 7, 2012 Hey 1994RedVert, I've still got 'em! PM sent... Quote
1988PhantomFE3 Posted May 7, 2012 Report Posted May 7, 2012 Do these go bad often? The only ones who uses the light switches are our kids when reading on long trips at night. Quote
j_mezz Posted May 8, 2012 Author Report Posted May 8, 2012 (edited) The original bulbs burn very hot which causes heat to build up and eventually the plastic in the switches fuses together. Someone on the forum tipped me off to the LED conversion bulbs which don't generate nearly as much heat. If your switches still work and you haven't done it already I'd suggest getting a set of LED bulbs. Edited May 8, 2012 by j_mezz Quote
1988PhantomFE3 Posted May 8, 2012 Report Posted May 8, 2012 hey j-mezz, you got those led's? PM me and I'll send you some $$ Quote
oldsfever Posted May 28, 2012 Report Posted May 28, 2012 Hey. I need to buy 4 more bulbs if you still have them. PM me with the price and I'll drop you some money. Thanks. Quote
George Posted July 18, 2012 Report Posted July 18, 2012 I did the map lights as well. The tangs that hold the light need to be squeezed together as the LEDs are smaller in dia. Works great. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.