Heza Posted May 21, 2003 Report Share Posted May 21, 2003 ok...i tried searching the forums, but too many other subjects came up. anyone who has a 4t60e/4t60 transmission with a cooler...what kind of transmission cooler did you use and where did you mount it? my buddy back home says i have one i could have, but i think it might be too big. anyone's help would be appreciated. thanks! Quote Link to comment Share on other sites More sharing options...
Redfox340 Posted July 23, 2003 Report Share Posted July 23, 2003 My old Cutlass had it stock from the factory. The radiator and tranny cooler were interconnected. However, when I bought the car, there was another cooler (about 6" x 9") that was bolted in front of the radiator. The mini cooler lines were taped into the existing cooler lines on the car and routed with 3/8" gas hose. - Erik Quote Link to comment Share on other sites More sharing options...
mdelorie Posted July 23, 2003 Report Share Posted July 23, 2003 same with mine, it's integrated into the rad. sits behind the A/C condensor. Quote Link to comment Share on other sites More sharing options...
Heza Posted July 23, 2003 Author Report Share Posted July 23, 2003 same with mine, it's integrated into the rad. sits behind the A/C condensor. i know it's integrated into the radiator...but no...not as effective as an actual screen that sits on front of the radiator. Quote Link to comment Share on other sites More sharing options...
PaPaPooh Posted July 25, 2003 Report Share Posted July 25, 2003 if i remember correctly from the tranny shop i worked at they offer a tranny cooler the radiator fluid goin threw it to try to keep the tranny fluid at 175 it is also tapped into the lines that go to the radiator but they are hard lines and not soft i have also seen stand alone coolers where the tranny fluid did not go into the radiator at all but it had Fuel line that the tranny fluid made brittle and broke so i would go with steel line both these are mounted infront of the a/c cooler or radiator so it gets fresh air i would get either one hope this helps Quote Link to comment Share on other sites More sharing options...
ismellrealbad Posted July 25, 2003 Report Share Posted July 25, 2003 same with mine, it's integrated into the rad. sits behind the A/C condensor. ditto here Quote Link to comment Share on other sites More sharing options...
JPaganel Posted July 25, 2003 Report Share Posted July 25, 2003 The mini cooler lines were taped into the existing cooler lines on the car and routed with 3/8" gas hose. - Erik With duct tape? Quote Link to comment Share on other sites More sharing options...
Redfox340 Posted July 25, 2003 Report Share Posted July 25, 2003 With duct tape? No, I wrote [typed] the wrong word. They were tapped into the system... ...you know: re-routed, altered, etc. - Erik Quote Link to comment Share on other sites More sharing options...
PaPaPooh Posted July 25, 2003 Report Share Posted July 25, 2003 With duct tape? No, I wrote [typed] the wrong word. They were tapped into the system... ...you know: re-routed, altered, etc. - Erik Quote Link to comment Share on other sites More sharing options...
SleeperRed90TGp Posted July 25, 2003 Report Share Posted July 25, 2003 Chris A had a couple a while ago for tgp's. Check out his site. http://www.turbogpgarage.com/ Jud Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.