Jump to content

How to: Retracting the rear caliper.


Slade901

Recommended Posts

I would just like to share my experience on retracting the rear caliper so that I can put a new brake pads on my vehicle.

 

The service manual suggests on using a GM special tool to rotate the rear caliper piston clock-wise.

 

I don't have that the GM suggests but I do have a universal rear caliper piston adjuster. It's a cube type so that it can be used on different types of rear caliper pistons.

 

I put an an extension bar and ratchet attached to that device and tried to rotate the piston (clock-wise) and it does not want to move at all and it keeps slipping. I thought that my rear caliper piston is seized.

 

What I have done instead is put a c-clamp on the device and tightened it so that the device won't fall off and the c-clamp will provide a force pushing the piston in. I use a screw driver to rotate the device (clock-wise) and tightened the caliper at the same time so that the device won't fall off. I used the screw driver to initially rotate the device and then halfway in I no longer need the screwdriver and I just have to tighten the c-clamp and the device is rotating (pushing the piston in) along with the c-clamp as it tightens it up.

 

Here are the pictures:

 

http://www.geocities.com/southbeach/sands/2476/automobile/rearcaliperadjustment1.jpg

 

http://www.geocities.com/southbeach/sands/2476/automobile/rearcaliperadjustment2.jpg

 

http://www.geocities.com/southbeach/sands/2476/automobile/rearcaliperadjustment3.jpg

 

 

Link to comment
Share on other sites

Really good idea, at work we have a nice kit that does just about what you did, but kind of all in one. Good to see there's a way to do it with the cube.

Link to comment
Share on other sites

I could never get the cube to work worth a shit, just can't get enough pressue on it to actually push it back in while rotating. I just stuck a really small block of wood between the piston and c-clamp, and the pressure from the clamp would kind of mold the wood to the face of the piston, and of course in effect turn it in.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...