ismellrealbad Posted November 10, 2002 Report Share Posted November 10, 2002 Any tips or advice on removing a power 8-way driver seat?? Maybe about how long of a job it is. Im going to have to do it sunday morning so any advie now is appreciated. I will figure it out eventually but any warnings or hint are always welcome and im pressed for time tomorrow so they will help a lot! Quote Link to comment Share on other sites More sharing options...
NORBI Posted November 10, 2002 Report Share Posted November 10, 2002 Hey It will take you about 5-15 min to remove each seat. 1st move the seat all the way to the front and take out 2 screws on the back of the track then move the seat all the way to the back and do same thing with two screws on the front of the track then just disconnect the cables under the seat and thats it. I was doing it in my CS when i got rid or bench seats and put seats from a 91 CS international same as you have in your GP. You are changing the drivers seat or both because i know that the drivers seat was in a bad condition. PS i will send you pictures later. Quote Link to comment Share on other sites More sharing options...
ismellrealbad Posted November 11, 2002 Author Report Share Posted November 11, 2002 hey thanks. yea i figured it out on my own in a snap. god it was prolly one of the easiest things ive removed in a car. i thought it was gunna be a bitch n half Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.