cobracdr Posted August 10, 2010 Report Share Posted August 10, 2010 just find a monroe or someplace with the welder and have them weld a bung in after the turbo......done. HAve it welded near the top of the downpipe. dont' take the turbo apart and swap the housings unless they are the same A/R you will not like the results. Ken Quote Link to comment Share on other sites More sharing options...
Penglii Posted August 10, 2010 Author Report Share Posted August 10, 2010 Getting the o2 bung taken care of on Wednesday. Not gonna swap any housings, not gonna mess with any of that jive. Chomping at the bit to get this turbo in the car... Quote Link to comment Share on other sites More sharing options...
Penglii Posted August 11, 2010 Author Report Share Posted August 11, 2010 Just want to double check... what size is the fitting on the end of the OEM braided turbo oil feed line? ( the ~6in one going from the block to the hard feed line) It seems that I read somewhere on TGPforums that it will mate with a -4AN male fitting... is that correct? Thanks! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.