Jump to content

How to lower a W-Body ( Gen 1, Gen 1.5 )


19Cutlass94

Recommended Posts

just ordered nuts and sleeves for my rear coilovers. im probably going to wait till next month to order my springs. i found a black nut while looking at the a1racing.com website and ordered that (http://www.a1racing.com/index.asp?PageAction=VIEWPROD&ProdID=1746). its the same price as the gold ones, but has more holes for a spanner wrench, which i dont care about, but its black instead of gold. so, im going to have black sleeves and black nuts w/ red coils. im going to get these springs and have them powdercoated red: http://store.summitracing.com/partdetail.asp?autofilter=1&part=HAL%2D12%2D175%2D350&N=700+4294925130+4294846689+4294791365+4294787535+4294868465+115&autoview=sku

 

Link to comment
Share on other sites

  • 2 months later...

First post has been updated.

:thumb:

 

i would add this link under the black coilover nut. it has set screws, but is gold. i havent had any problems w/ the black one (no set screws)moving, but its def possible.

http://www.a1racing.com/index.asp?PageAction=VIEWPROD&ProdID=1744

 

 

i would also add this link for springs (any of these can be used):

http://store.summitracing.com/egnsearch.asp?N=700+4294925130+4294846689+4294791365+115+4294787535

 

Link to comment
Share on other sites

First post has been updated.

:thumb:

 

i would add this link under the black coilover nut. it has set screws' date=' but is gold. i havent had any problems w/ the black one (no set screws)moving, but its def possible.

http://www.a1racing.com/index.asp?PageAction=VIEWPROD&ProdID=1744

 

 

i would also add this link for springs (any of these can be used):

http://store.summitracing.com/egnsearch.asp?N=700+4294925130+4294846689+4294791365+115+4294787535

 

[/quote']

 

That looks to be the exact adjuster nut that comes with the Held Coil over kits.

 

Jay, you can take underbody reconditioning off that list, I never did get around to that, ran outta time. Maybe next summer, who knows.

 

Jamie

Link to comment
Share on other sites

the only cars that are 1.5 gen are the lumina 1995-2001 and the monte 1995-1999 thats it, best and easieest way to tell, its all in the rear end, look at your rear strut mounts, the 1.5 gens use 3 bolt strut mounts like 2nd gen Gp's and regals, and 1st gens use a 2 bolt design that will fit aweb's rear stb

Link to comment
Share on other sites

  • 2 months later...

First post updated due to dead links. Also fixed a few things.

 

 

Any questions please let me know!

 

and

 

BUMPING THIS SO PEOPLE KNOW WHERE TO LOOK SO THEY STOP ASKING QUESTIONS BECAUSE THE ANSWERS ARE IN THIS THREAD.

Link to comment
Share on other sites

  • 4 months later...

so to drop the front of my car ALL I need is to buy is the spings and change them??? NOTHING else??? I'm confussed :redface:

I would recommend new struts as well. You will blow the stockers if you don't.

Link to comment
Share on other sites

  • 10 months later...

Here's another for the lowered pics:

 

Photo_050509_001.jpg

 

This job was done with KYB GR2 shocks all around, KYB strut mounts all around, Suspension Techniques springs up front, and a custom fabricated Flex-A-Form rear leaf.

Link to comment
Share on other sites

  • 8 months later...

So Im going to try an update this thread, since this topic always seems to be coming up. So anyone with some new information please post so I can better update first post.

Link to comment
Share on other sites

  • 3 months later...
So Im going to try an update this thread, since this topic always seems to be coming up. So anyone with some new information please post so I can better update first post.

 

 

wanted to add that Intrax springs on 1st gen cars will drop the front suspension *at least* 3.5". before someone orders a 2 inch rear drop spring from birchmount like I did. another thing to watch out for is a 2" drop birchmount spring with pucks is same as stock pretty much. you would need more like 4 1/2" birchmount spring for it to be a close match with the intrax fronts.

Link to comment
Share on other sites

my tgp has a 3" drop birchmount, with shaved pucks (1/3 the thickness of normal) and intraxs up front.

 

 

sitting on 245-45-16

 

tgpdowntown.jpg

Link to comment
Share on other sites

my front end almost looked lower than that with the intrax springs for some reason. not sure why the rear didn't drop at all but I might go and shave the pucks at least.

 

What side of the puck do you shave?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...