tonytoca_87 Posted December 29, 2015 Report Share Posted December 29, 2015 Hi everyone I'm new to this forum. Does anyone have any experience installing HID'S in there cutlass. I have a 1995 vert and I want to install HID's but was told the low beam bulbs can be replaced. Any feedback would be highly appreciated. Thanks tonytoca_87 1 Quote Link to comment Share on other sites More sharing options...
94 olds vert Posted December 29, 2015 Report Share Posted December 29, 2015 Welcome! The old bulbs can be replaced. I am sure there is a write up here on how to do it. tonytoca_87 1 Quote Link to comment Share on other sites More sharing options...
tonytoca_87 Posted December 30, 2015 Author Report Share Posted December 30, 2015 Thanks for the quick reply!! If u can send me the link that would be awesome. Thanks tonytoca_87 1 Quote Link to comment Share on other sites More sharing options...
Psych0matt Posted December 30, 2015 Report Share Posted December 30, 2015 Mine were a direct swap, however you do have to silicone the new bulbs in like you would with any replacement bulb. I've done it two or three times and both my cutlass I used to have and in my GTP with no issues. tonytoca_87 1 Quote Link to comment Share on other sites More sharing options...
94 olds vert Posted December 30, 2015 Report Share Posted December 30, 2015 I had to silicon a 9006 bulb into the back of the housing, but it has held up well. I guess that is all there is to it. Along with mounting the HID ballast. tonytoca_87 1 Quote Link to comment Share on other sites More sharing options...
tonytoca_87 Posted December 30, 2015 Author Report Share Posted December 30, 2015 I appreciate the help. I am going to attempt to do it myself. Thanks I had to silicon a 9006 bulb into the back of the housing, but it has held up well. I guess that is all there is to it. Along with mounting the HID ballast. Quote Link to comment Share on other sites More sharing options...
tonytoca_87 Posted December 30, 2015 Author Report Share Posted December 30, 2015 Thanks buddy. This forum is very helpful Mine were a direct swap, however you do have to silicone the new bulbs in like you would with any replacement bulb. I've done it two or three times and both my cutlass I used to have and in my GTP with no issues. Mine were a direct swap, however you do have to silicone the new bulbs in like you would with any replacement bulb. I've done it two or three times and both my cutlass I used to have and in my GTP with no issues. tonytoca_87 1 Quote Link to comment Share on other sites More sharing options...
55trucker Posted December 30, 2015 Report Share Posted December 30, 2015 There is a simple youtube video which gives directions as how to cut off the back end of the old 4351 sealed bulb & then remove the retainer to allow one to slip in a replacement bulb & seal it into place. When I did my low beams I replaced the lower lumens rated 9006 bulbs (1100) with higher lumens 9005 (1700) high beam bulbs. still not satisfied with the lamps brightness & the light in front of the car I have ordered an 9005 4300k HID kit for the lows, http://idkerja.top/videos/h4351-to-9006-headlight-conversion?v=XIFgKxkIjHk Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.