Fmr12B Posted October 10, 2005 Report Share Posted October 10, 2005 Cutlass has a Alpine HU installed, and the installation job is the worst I have ever seen. And since I'm not familiar at all with these cars and their wiring schematics I need some help. On the harness adapter I would expect all wires to go through the harness but 1-wire does not. The Yellow accessory wire which turns the HU on is routed outside of the harness. Is this normal? 4-wires are not used on the factory harness, well make that 3 now that I finally got the power antenna figured out but I just threw it on the accessory wire as I could not find the true power antennae switch. Any links to some wiring diagrams or helpful hints would be great. Link to comment Share on other sites More sharing options...
DiscoStudd Posted October 10, 2005 Report Share Posted October 10, 2005 http://www.w-body.com/forum/viewtopic.php?t=31171 The FAQ section is your friend ... Link to comment Share on other sites More sharing options...
jeremy Posted October 11, 2005 Report Share Posted October 11, 2005 Thanks Kevin Link to comment Share on other sites More sharing options...
Recommended Posts