Jump to content

Took Of Plenem UHOH..


89Cutlass

Recommended Posts

Today i decided to take of the plenem to inspect the vacum lines under it and got it back on and now that motor starts and stalls right away. I think i might have to change the gaskets. Also were it splits at the air intake were the IAC is. Anyone had this happen or heard of it before.

 

Thanks

Link to comment
Share on other sites

I just went and bought a new intake gasket set. It came with the 2 upper the side gasket and the egr gasket for only 6.99.

 

Ill change um tommorow

 

i forgot that once you take them off you have to change them

Link to comment
Share on other sites

No frigging way 6.99? I got one set last week for like $28. damn. It did come with this extra gasket that was pretty big for the lower intake, but no way was I going to tackel that job. Just the top for now thank you.

Link to comment
Share on other sites

Usually you can buy the set with or without the "valley pan gasket". This is the large lower intake gasket. Without the valley pan gasket is much cheaper than with it.

 

Jason

Link to comment
Share on other sites

i need to do the valley gasket soon (again) has anyone successfully done this without getting coolant in the engine? I drained it last time and I still had a few drops get in...

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...