SantaCruzTGP Posted July 29, 2004 Report Share Posted July 29, 2004 I'm trying to run a wire through the firewall, I can't seem to locate any wire inlets, just plugs that are bolted to the firewall. I can't get my hands down there to undo anything. Any recomendations how to run the wire from the battery to the trunk, any advise greatly appreciated. -Jeromy Quote Link to comment Share on other sites More sharing options...
god910 Posted July 29, 2004 Report Share Posted July 29, 2004 What size wire are we talking about? If large I would say make your own hole and make sure to use the proper grommet. If it's small we used to just run it through an existing plug, such as the speedo cable or throttle cable hole. If small enough it should fit through w/ the existing cable/wire in there. Quote Link to comment Share on other sites More sharing options...
SleeperRed90TGp Posted July 30, 2004 Report Share Posted July 30, 2004 Below and to the left of the abs there is a factory hole for standard shift cars. If you have an automatic the hole is empty. Thats the hole most guys use. Jud Quote Link to comment Share on other sites More sharing options...
SantaCruzTGP Posted July 30, 2004 Author Report Share Posted July 30, 2004 Thanks for the advise, off to look. -Jeromy Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.