kingchase92 Posted January 7, 2016 Report Share Posted January 7, 2016 Hey guys what's up. I have a few questions. 1st: would an eaton m62 supercharger fit on a 3.4 multi port injection quad cam? I have a lumina z34 with some performance mods on it. And 2nd: would it fit? I want to drop a Buick 3.8 s/c in it but not sure on what all I would have to do. Open to any ideas! And where can I go to get louvers for my side and rear window? And another thing lol. Where could I find another z34 at in Tennessee? kingchase92 1 Quote Link to comment Share on other sites More sharing options...
rich_e777 Posted January 7, 2016 Report Share Posted January 7, 2016 Theres a 1993 Z34 at the Nashville Pull a Part near the small John C Tune airport. No a 3800 S/C will not fit on a 3.4 Lq1 without serious modification and fabrication. Ebay or here will be the best place to find the louvers but they do not come around often if at all. I`ll be heading out to pull a part on Friday for some stuff off that Z34 and other cars, then probably some beer after. I need the pcm and two other members are interested in the center console and a vacuum port manifold off the engine. Now a L67/4T65E will fit into the engine bay of a Z34, IIRC you need a harness from a `97-99 Monte with the 3800 one which I belive is there. A white one with a 3 piece trunk lip I thought about grabbing to sell on here or Ebay. Quote Link to comment Share on other sites More sharing options...
19Cutlass94 Posted January 8, 2016 Report Share Posted January 8, 2016 www.l67swap.com topic has been covered way more than it should have been. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.