L67 swap A/C

[Quaraxkad]

I have an L67 swap in my 92 Cutlass, which I never bothered to hook up any of the A/C for. I want to do that now and am in the process of collecting parts, but I've found conflicting information on what lines are needed from what cars. I have all the original lines from the 3.1 LH0. I should have most of the lines from the 04 Impala SS donor. I think I have some other random lines I may have grabbed from junkyards while working on the swap years ago.

 

Does anybody know for sure what A/C lines will fit?

[Bake82]

The best bet is 98/99 Lumina LTZ/Monte Carlo Z34 with the 3.8.  Grab all the lines in the engine bay off one of those cars, 

6-7 yrs ago I bought the hardlines that connect to the firewall directly from GM.  Wonder if you could do the same?  

 

I also believe that lumina Z34's have same lines that can work, but I cannot confirm this.  

[55trucker]

I'm going to differ with you on this Kyle.......

what OP needs is the necessary A/C piping from a 1st Gen Regal with the 3.8 engine.

If you intend on keeping as much as your car is currently fitted with you'll need the a/c compressor manifold hose assembly that was fitted to the 3.8 Regal & a new rebuilt pre 94 compressor.

Everything prior to 94 is R12 based, everything post 93 is R134 based. When GM introduced 134 in 94 they changed ALL of the A/C line fittings thread pitch so NOTHING from prior & post can be used together.

My suggestion to you is to keep your 92 car all 92, get that old 92 3.8 manifold hose assembly & purchase a new *rebuilt* pre 94 A/C compressor, even the manifold hose assembly changed in 94 because GM redesigned the back end of the compressor housing for 94 so the old manifold hose will not attach to the newer design compressor housing. 

Purchase yourself a new receiver/dryer as well as a new orifice tube.

Go into Rockauto, search 92 Regal, they still house most of what you'll need.  

[Black92GS]

Just now, 55trucker said:

I'm going to differ with you on this Kyle.......

what OP needs is the necessary A/C piping from a 1st Gen Regal with the 3.8 engine.

If you intend on keeping as much as your car is currently fitted with you'll need the a/c compressor manifold hose assembly that was fitted to the 3.8 Regal & a new rebuilt pre 94 compressor.

Everything prior to 94 is R12 based, everything post 93 is R134 based. When GM introduced 134 in 94 they changed ALL of the A/C line fittings thread pitch so NOTHING from prior & post can be used together.

My suggestion to you is to keep your 92 car all 92, get that old 92 3.8 manifold hose assembly & purchase a new *rebuilt* pre 94 A/C compressor, even the manifold hose assembly changed in 94 because GM redesigned the back end of the compressor housing for 94 so the old manifold hose will not attach to the newer design compressor housing. 

Purchase yourself a new receiver/dryer as well as a new orifice tube.

Go into Rockauto, search 92 Regal, they still house most of what you'll need.  

One issue you may run into there is that 3800 series 1 powered cars all used the HR6 style AC compressor vs the V5 compressor that the 60 degree V6s and the 3800 series 2 cars used. 

A 1996 Buick Regal 3800 would have had a 3800 series 2 from the factory, so you might need to look for the AC components for one of those. 

 

[Quaraxkad]

Reviewing some components other than lines...

I just checked the part numbers (3093285) for the evaporator core, and they're the same part from '88-'01 in just about every W-body, including 92 Regal, 92 Cutlass, 98 Monte. So at least the fittings there should bolt up no problem from any donor.

The condensors are the same part number (52452050) from 89-93 and 94 Lumina (did it still get R12 that year?), and a second part number (52481282) for the rest of 94-01. Aftermarket lists them both as having 3/4" - 16 thread inlet and outlets, good for R12 and R134, but different core thickness (18mm and 25mm), and slightly different core dimensions and styles. Other than that they seem to be the same, possibly interchangable. I already do have a brand new 89-93 condensor I bought several years ago and never installed.

[Black92GS]

59 minutes ago, Quaraxkad said:

Reviewing some components other than lines...

I just checked the part numbers (3093285) for the evaporator core, and they're the same part from '88-'01 in just about every W-body, including 92 Regal, 92 Cutlass, 98 Monte. So at least the fittings there should bolt up no problem from any donor.

The condensors are the same part number (52452050) from 89-93 and 94 Lumina (did it still get R12 that year?), and a second part number (52481282) for the rest of 94-01. Aftermarket lists them both as having 3/4" - 16 thread inlet and outlets, good for R12 and R134, but different core thickness (18mm and 25mm), and slightly different core dimensions and styles. Other than that they seem to be the same, possibly interchangable. I already do have a brand new 89-93 condensor I bought several years ago and never installed.

When it comes to evaporators, the real test would be checking the part number for a 92 Regal with the 3800 against one for a 92 cutlass. If the part numbers match, you should be OK there. 
 

88-95 Regals with the 2.8/3.1/3100 would have had the same AC setup as the other Ws of the same year. The 3800 series 1 cars, of which the 90-95 Regals were the only Ws to use it, used a completely different AC compressor and AC setup(Cycling clutch vs variable displacement compressor) Some parts might match and interchange with other Ws, while others won’t. 
 

Just something to keep in mind when cross shopping parts. AC parts for a 92 Regal with the 3.1 should all match a 92 cutlass, where as parts for a 92 Regal with the 3800 may not all be the same. 

Edited 21 minutes ago by Black92GS