cutlassman Posted Tuesday at 08:06 PM Report Posted Tuesday at 08:06 PM Hey everyone, my 1992 Cutlass Supreme Convertible I’ve had since 2000 is dead. It hydrolocked. I did manage to get it to start a couple times for a few seconds, but there’s a horrible knock and coolant out of the dual exhaust. I’ve ripped it down to the block once, about 14 years ago and don’t feel like doing it again. I should junk the car…but you know how that goes. So, I’m looking for a remanufactured engine with a warranty that I’ll have a local shop install. Any recommendations on the best company to go with? Looking at S&K Engines….Accurate Engines…ATK via Jegs…let me know if you have any experience with a remanufactured engine, or a shop in the Southeast I could send it to. Quote
55trucker Posted Tuesday at 10:53 PM Report Posted Tuesday at 10:53 PM Which engine are you referring to........the pushrod 3.1 or the 3.4 DOHC? Quote
cutlassman Posted Tuesday at 10:54 PM Author Report Posted Tuesday at 10:54 PM Should have mentioned that! The 3.1L. Quote
55trucker Posted Tuesday at 10:57 PM Report Posted Tuesday at 10:57 PM Hard decision......putting all personal emotion aside...what's the car worth to you? Quote
cutlassman Posted Tuesday at 11:02 PM Author Report Posted Tuesday at 11:02 PM Totally for sentimental value because financially it doesn’t make any sense to drop $4k on it! Probably wouldn’t be worth more than that afterwards. It has 172k miles, but I have the money to spend, so want to have a quality replacement engine. rich_e777 1 Quote
55trucker Posted Tuesday at 11:08 PM Report Posted Tuesday at 11:08 PM Well, from where I stand I would probably look for a 3400 LA1 shortblock, plunk the T-code heads & intake down onto it, & install a custom 3400 T-code engine into the car. I personally wouldn't waste my money on just a T code 3.1 cutlassman and rich_e777 1 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.