97cutty Posted July 16 Report Posted July 16 (edited) anyone on here that owns a cutlass with aftermarket wheels could you post a picture under this post of your ride, with wheel fitment specs. thanks to all i’m trying to figure out what type of wheels i want to put on and i was also wondering if a set of 18x8.5 +30 wheels would be too wide for the front or if the offset helps tuck enough Edited July 16 by 97cutty Go4DaMo 1 Quote
GnatGoSplat Posted July 18 Report Posted July 18 18x8 +42 with 5mm spacer = +37. Needed spacers to clear the front calipers, and I didn't want the rear to look more tucked than the front, so I put spacers on the rear just to match. Your tires would stick out 7mm more than mine if you go for 245-wide. 97cutty 1 Quote
97cutty Posted 10 hours ago Author Report Posted 10 hours ago (edited) i’d go a little smaller of tire because the overall plan is to put airbags on it when the shop gets a spot open, the goal for me is to have the wheels flush with the body the tires slightly in more than the wheels to have a mean ass fitment when the air bags to air out but Edited 10 hours ago by 97cutty GnatGoSplat 1 Quote
GnatGoSplat Posted 8 hours ago Report Posted 8 hours ago As long as you're not looking for it to tuck, that should be no problem. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.