does anyone have any 2.8 Buick Regal, Olds Cutlass or Pontiac GP parting out?

[89-W-Body-Regal]

I need several electrical connectors replaced on my 2.8. Can anyone tell me if they can help me out? I don’t think any of the connectors are going to work with my harness from a 3.1 because I have a vacuum egr valve. The 3.1 mostly has the electronic egr valve and I seen the connectors are completely the opposite. What about the other sensors? Can I crimp these connectors from the harness that has the electronic egr valve and crimp them onto my harness that has the vacuum egr?

 

list of connectors that need to be replaced due to a critter chewing them. The bastard even chewed all of my weather packs smh.

MAP SENSOR- GREEN WEATHERPACK

- VAPOR CANISTER PURGE VALVE SOLENOID- TAN WEATHERPACK

- EGR VALVE- GREY WEATHERPACK 2.8 only vacuum 

- CRANKSHAFT POSITION SENSOR- BLUE WEATHERPACK

- THROTTLE POSITION SENSOR- BLUE WEATHERPACK

- COOLANT ENGINE TEMP SENSOR- BLUE WEATHERPACK

- IDLE AIR CONTROL VALVE- BLUE WEATHERPACK

- OIL PRESSURE SENDER SWITCH- NEAR THE OIL FILTER- GREEN WEATHERPACK

- AC COMPRESSOR CLUTCH COIL CONNECTOR- CONNECTOR IS ON THE SIDE OF THE CLUTCH PULLEY- BLUE WEATHERPACK

- AIR INTAKE TEMP SENSOR- on the air filter box- BLUE WEATHERPACK

Edited 5 hours ago by 89-W-Body-Regal