jmjp5055 16 Report post Posted September 13 (edited) I’m at a loss as to how the harness connector on the gauge cluster unplugs? thanks in advance Edited September 13 by jmjp5055 Share this post Link to post Share on other sites
jiggity76 777 Report post Posted September 13 (edited) I'm dealing with this on my 91 right now, that blue connector lock has two prongs on the top, spread those out and then push down on the tab and that connector lock will come off. The plug itself is in pretty deep for the pins to connect and I just worked it back and forth a little and then used a constant steady pressure to pull it out. As with all plugs/connectors, pull from the body and not the wires and it should come out. Are you upgrading or is your cluster dead? Edited September 13 by jiggity76 Share this post Link to post Share on other sites
Imp558 3,892 Report post Posted September 14 Squeeze the blue thing and watch for the barb on the other end to clear the body on the socket, then wiggle and pull. 1 94 olds vert reacted to this Share this post Link to post Share on other sites
