Galaxie500XL Posted August 20, 2017 Report Share Posted August 20, 2017 I got a spoiler for our member in Connecticut, and measured the holes...figured it would be potentially helpful. The holes are "waterproofed" using a donut of putty to seal around the holes..Home Depot has a perfect putty that's used to seal duct work. A pound of it costs less than $4.00, and the stuff has a million uses. I will post more pictures later, but here's the dimension from the bottom lip of the trunk. 94 olds vert 1 Quote Link to comment Share on other sites More sharing options...
Galaxie500XL Posted August 20, 2017 Author Report Share Posted August 20, 2017 Passenger side hole. Quote Link to comment Share on other sites More sharing options...
Galaxie500XL Posted August 20, 2017 Author Report Share Posted August 20, 2017 Passenger inner Quote Link to comment Share on other sites More sharing options...
Galaxie500XL Posted August 20, 2017 Author Report Share Posted August 20, 2017 Center holes Quote Link to comment Share on other sites More sharing options...
Galaxie500XL Posted August 20, 2017 Author Report Share Posted August 20, 2017 Driver side holes Quote Link to comment Share on other sites More sharing options...
MemphisMan Posted August 20, 2017 Report Share Posted August 20, 2017 Thanks for taking the time to post these. Sure to be helpful to folks. Galaxie500XL and 94 olds vert 2 Quote Link to comment Share on other sites More sharing options...
rich_e777 Posted August 23, 2017 Report Share Posted August 23, 2017 (edited) nvm twas referring to the lip spoiler not the wing spoiler. Edited August 23, 2017 by rich_e777 Quote Link to comment Share on other sites More sharing options...
bluecalais79 Posted November 13, 2017 Report Share Posted November 13, 2017 How big are the holes, I'm not able to tell from the photos, thx Quote Link to comment Share on other sites More sharing options...
Galaxie500XL Posted November 13, 2017 Author Report Share Posted November 13, 2017 I looked at the original pictures, the metric scale was the clearest, 11mm, which translates into.43 inches. Note also there’s a donut of putty around each one. Quote Link to comment Share on other sites More sharing options...
bluecalais79 Posted November 14, 2017 Report Share Posted November 14, 2017 Yep, thanks, it was probably a metric tool that made them. This will be my #1 project next spring. Galaxie500XL 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.