jazic3.4 Posted July 4, 2006 Report Share Posted July 4, 2006 I have to replace the long cooler line which is directly on the rack. I can see both ends of it but I can't get a flare wrench on them because there isn't enough room. The manual says to lower the subframe 3 inches. Do i have to unhook the intermediate shaft bolt and both tie rod ends from the nuckle or can I just lower the subframe without unhooking the mentioned above? Quote Link to comment Share on other sites More sharing options...
slick Posted July 4, 2006 Report Share Posted July 4, 2006 3" is nothing. I've lowered one side or another of the subframe without undoing anything with no damage. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.