Megavolt-380 Posted May 26, 2023 Report Share Posted May 26, 2023 front FE3 34mm second in the last three years ((( Why??? Quote Link to comment Share on other sites More sharing options...
White93z34 Posted May 27, 2023 Report Share Posted May 27, 2023 Thats a new one to me Ive had the subframe where it mounts rust out but never the bar itself. Quote Link to comment Share on other sites More sharing options...
55trucker Posted May 28, 2023 Report Share Posted May 28, 2023 The entire area where that issue has developed is due to corrosion. One can see the rot in the tube right there.....they ARE hollow, a common occurrence with the gen 2 front anti roll bars. Quote Link to comment Share on other sites More sharing options...
GTP091 Posted May 28, 2023 Report Share Posted May 28, 2023 (edited) If you can find a new one I’d suggest you sandblast it and powder coat. Then pour some paintable rust converter inside and coat it all around. That should stop your issues. I’ve never seen that happen before myself on any vehicle either. Edited May 28, 2023 by GTP091 Quote Link to comment Share on other sites More sharing options...
TonyT Posted August 17, 2023 Report Share Posted August 17, 2023 Post is a little old, but I just swapped out my front sway bar with a solid 33mm one from ZZP about a month ago. My stock bar was broke at the end (see image). ZZP one is way beefier. 94 olds vert 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.