metallic95 6 Posted April 1 Report Share Posted April 1 Hey guys, Got myself into a honeydoodle of a melon scratcher due to my usual mistake of not taking pictures before I take something apart. The brake line running to the rear passenger caliper had some pretty bad patches of rust, so I changed it out with a nicopp line. I was wondering if someone was lucky enough to have photos of how the line is oriented coming in and out of the subframe, just to give me a hand with positioning it properly. Ignore the current position of the line in the photos, I just threaded it through and let it dangle. Any help is very much appreciated. Quote Link to post Share on other sites
ron350 30 Posted April 1 Report Share Posted April 1 See if these pictures make any sense. Quote Link to post Share on other sites
jiggity76 1,748 Posted April 1 Report Share Posted April 1 I can also take pics of my 91 Cutlass coupe if that will help. It's currently up on jackstands. metallic95 1 Quote Link to post Share on other sites
ron350 30 Posted April 1 Report Share Posted April 1 These pictures show Rear Passenger side brake line routing from Drivers side to Passengers side. There are two brake line hold down clips on top of the leaf spring support. metallic95 1 Quote Link to post Share on other sites
ron350 30 Posted April 1 Report Share Posted April 1 For some reason this picture displayed on its side. Quote Link to post Share on other sites
metallic95 6 Posted April 2 Author Report Share Posted April 2 Thank you very much as well jiggity. Going to screw with it a bit more to see if I can get it just right. jiggity76 1 Quote Link to post Share on other sites
ron350 30 Posted April 3 Report Share Posted April 3 I have more pictures if needed. metallic95 1 Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.