Jump to content

How to remove B4U fender flares?


Brodizzle83
 Share

Recommended Posts

I need to do some rust repair behind the fender flares on my '96 GP but not sure how to remove them. I really don't want to break anything trying to remove them.

 

Sent from my Pixel 3 XL using Tapatalk

 

 

Link to comment
Share on other sites

  • 2 months later...

I’m a little late to the party so this may be useless but I have removed and installed these. There should be 4 or 5 really long screws holding them on and one short one. Take these screws out of the flare. Once those are out there is a spacer that goes between the fender and the flare. Take the spacer out and then simply push the flare up. I would clean the fender really good and spray some silicon spray in between the fender and the flare so you minimize scratches when it comes up. It’s held onto he fender by small steel hooks that are riveted to the fender. 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...