Jump to content

Should I get these?


James Robert
 Share

Recommended Posts

4 hours ago, jimmyfloyd said:

Thanks. I was looking for something like that online but couldn't find it. Looks like the wheels won't fit, the offset is quite a bit different.

 

J

Link to comment
Share on other sites

did you check the calculators, or just look at the offset? The offset and the rim width go hand in hand, so you can't purely look at the offset and say they are too different, unless the widths are the same. This is because the offset is off the center line, and the center line will locate the wheel differently.

That being said, a rim that is too wide may rub. 

Link to comment
Share on other sites

On ‎12‎/‎3‎/‎2018 at 9:32 PM, jimmyfloyd said:

did you check the calculators, or just look at the offset? The offset and the rim width go hand in hand, so you can't purely look at the offset and say they are too different, unless the widths are the same. This is because the offset is off the center line, and the center line will locate the wheel differently.

That being said, a rim that is too wide may rub. 

I just looked at the offset, and the wheel width is over 1.25" different. I don't want to overload the bearings with a high offset.

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...