Jump to content

Intake Plenum Removal


IronEagle
 Share

Recommended Posts

If you have the smooth top (Gen 1 3.1), the throttle unbolted (2 13mm bolts), and the EGR valve unbolted (2 13mm nuts), once you have those off, all that remains in the vacuum port on the rear of the of the plenum. Then you unplug the sensor on the left side of the plenum. Unbolt the 9 (10mm) bolts on top of the plenum. Carefully lifting it up, there is still one more vacuum line under the plenum that cant be reached until the plenum is lifted off.

I think thats it, been a couple years since I pulled a plenum off one of these.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...