Jump to content

Motor/tranny mounts


98gpgt
 Share

Recommended Posts

Can they be changed simultaneously? IOW undo all the bolts, jack up engine, and remove both mounts at the same time? The Haynes manual says put the jack under the tranny pan, in the video I watched the guy had it under the engine, which makes more sense if you ask me.

Link to comment
Share on other sites

I would do them on the same lift of the car separately so it's easier to line them up. Each one is four bolts. The engine side mount is a little tricky with the U bracket in the way.

Link to comment
Share on other sites

  • 2 weeks later...

Ok mounts have been replaced. Not real sure it was even necessary. The motor mount bracket thing, what the mount gets bolted to up top, wiggled when I tried while motor was lifted. To repair or replace that - can it be done with engine in car? Couldn't get a good look at anything, and didn't feel like taking the oil filter off. The bracket seemed to lean harder on the rear of the mount. I'll take some pictures tomorrow maybe.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...