Jump to content

new here with a 94 CSC


Olds007
 Share

Recommended Posts

I picked it up from the original owner, little old lady...

its been garaged most of its life, runs great .. and not a spec of rust

on the car (its been here in Tucson since day 1)

If I can find a nice set of 18" wheels I may put them on.. I have a speed

shop here in Tucson, its a mod I could live with and swap back if I needed

to as well easily enough. But the car is so original and un molested I would

hate to change anything too far and ruin it.

If I start driving it more and can put a babyseat in it correctly, I may install

a HID headlight conversion too, since its all plug n play.

THe car does need struts, they are pretty worn out.

post-9123-143689184746_thumb.jpg

  • Like 1
Link to comment
Share on other sites

Looks gorgeous.

 

BTW the HID kit isn't PNP, you have to break off the 9006 bulbs off the sealed beam then re-silicone (or tape) the HID bulb in.

Link to comment
Share on other sites

Looks gorgeous.

 

BTW the HID kit isn't PNP, you have to break off the 9006 bulbs off the sealed beam then re-silicone (or tape) the HID bulb in.

 

Which is super easy

Link to comment
Share on other sites

It currently has a black top, not sure if its original or not...

it could of been white, Id have to decode the RPO sticker..

And on the HID kits, we actually the conversion headlights for

these cars so you dont modify the stock units at all. The new kit has 2 new headlight

non sealed units, and the HIDs plug right in .

Link to comment
Share on other sites

Which is super easy

 

Annoying more than anything but not as hard as a LIMG

 

And on the HID kits, we actually the conversion headlights for

these cars so you dont modify the stock units at all. The new kit has 2 new headlight

non sealed units, and the HIDs plug right in .

 

 

Do you have pictures of these?

Link to comment
Share on other sites

No, the units are too small for a projector and most of the aftermarket

projectors arent very good quality anyways, so I dont mess with those

conversions too often. Factory projectors are great.. most aftermarket

are junk. 5 or 6K HIDs work great.

Link to comment
Share on other sites

No, the units are too small for a projector and most of the aftermarket

projectors arent very good quality anyways, so I dont mess with those

conversions too often. Factory projectors are great.. most aftermarket

are junk. 5 or 6K HIDs work great.

 

On the Camaro forums, there's folks that sell the mini quad with a Morimoto projector. I've personally thought about using the small projectors out of a A6 wagon. I have a set on hand, just haven't gotten around to building the "housing"

Link to comment
Share on other sites

  • 2 months later...

The ones I've seen use the Morimoto matchbook projectors which put out half the light of the Morimoto mini H1 according to the guys at The Retrofit Source..

 

 

Sent from my iPhone using Tapatalk

Link to comment
Share on other sites

  • 2 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...