cribles Posted September 26, 2014 Report Share Posted September 26, 2014 This part is designed really stupidly and the little tabs that I guess keep pressure on the ball to keep it from moving have broken. I really don't want to spend $300 on a new mirror. If anybody knows other solutions please let me know. Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
Emptydarkone Posted September 26, 2014 Report Share Posted September 26, 2014 Cheapest, quickest method? Run a bead of JB Weld around the inside edges and put back in place. Secure it until it cures. Even with the JB, you'll still retain some adjustability, but I would set it as close to where you normally have it aimed as possible. Other method, junk yard. Quote Link to comment Share on other sites More sharing options...
cribles Posted September 26, 2014 Author Report Share Posted September 26, 2014 appreciate it. I will prolly run to a junk yard next week or so it's just all the way across town.. Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
Withilt Posted October 14, 2014 Report Share Posted October 14, 2014 Its the set screw. Probably broken. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.