Jump to content

Changed fuel pump, now passenger parking brake binds


pitzel
 Share

Recommended Posts

Changed the fuel pump, now the passenger side parking brake is permanently bound on.

 

Presumably the tank is causing this.

 

Anyone else had this problem when changing the fuel pump? I'm going to loosen the straps up again and take a pry bar and try to pry the tank forward a bit.

Link to comment
Share on other sites

I don't recall the park brake cables being all that close to the tank. I wasn't especially careful about the cables when I dropped the tank in my '92 Lumina.

 

Maybe you've got the dreaded 1st Gen caliper-sticking problem I keep hearing about (but have never experienced.)

 

How often do you actually USE the park brake?

Link to comment
Share on other sites

Okay, I'm dumb (again). Turns out when I was working on the tank filler tubes through the wheel well, I moved the e-brake cable aside and it got caught on the frame in a weird way instead of hanging relatively loose around the strut. Fixed that, and all back to normal!

 

Thanks for putting up with my stupidity.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...