UA-65274002-1 Jump to content
Sign in to follow this  
l67ss

stiffest rear sway bar installed in a w

Recommended Posts

On ‎12‎/‎2‎/‎2013 at 7:20 AM, 94 olds vert said:

For 1st gens and 1.5 gens the Monte Z34 bar should be the biggest diameter wise. Thats what I put in my CSC.

Did you put both the front and rears in your Vert or just the rear and what mm are the swaybars?

Share this post


Link to post
Share on other sites
On 11/24/2018 at 1:23 PM, Isaiah Brown said:

Did you put both the front and rears in your Vert or just the rear and what mm are the swaybars?

 

The front is a 34MM sway bar, and I forget what size the rear is. Any first gen sway bar will fit in any other 1st gen without issues. 

Share this post


Link to post
Share on other sites
On ‎11‎/‎27‎/‎2018 at 6:37 PM, 94 olds vert said:

 

The front is a 34MM sway bar, and I forget what size the rear is. Any first gen sway bar will fit in any other 1st gen without issues. 

and that's the largest that came on the first gen W's, brother?

Share this post


Link to post
Share on other sites

For the front from factory yes the Z34 bar is the biggest, for the rear its the 98-99 Z34 but I couldnt get it to fit my 1995 without it pushing the rear wheels out about 1/2" each side. I was also swapping to some modified 2nd gen GTP lateral links but I set them to match the length of the factory links but if they were to be extended to allow for the sway bar I was afraid the monoleaf would pop out of place. 

Share this post


Link to post
Share on other sites

It just dawned on me that since I'm converting to 2nd gen suspension I can run 2nd gen (and possibility 3rd gen?) Sways. 

So anybody know what a second gen's biggest sway options are? 

Share this post


Link to post
Share on other sites
It just dawned on me that since I'm converting to 2nd gen suspension I can run 2nd gen (and possibility 3rd gen?) Sways. 
So anybody know what a second gen's biggest sway options are? 

I have the biggest you can get for the 2nd gens. The front is a 1.33” solid bar. 36mm I believe? The rear is a GMPP. May not be the biggest for the rear but I know the front is. That’s a 34mm I believe.

Share this post


Link to post
Share on other sites

I saw ZZP had the house brand and another. In the end I should have another 100 - 150# over the rear axle (stereo) and wide, sticky tires so I'd like to start high and if the rear end comes around I can fall down a size or two. 

I'm still contemplating dual bars for the badassity of it.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×