bkaab Posted May 23, 2012 Report Share Posted May 23, 2012 (edited) Well I took the car apart last fall because I had to make my own heater core hose and I just putting stuff back together. So I think 1 or 2 of the bolts went to that. And where does the hose thats on the coolant overflow cap go to. Also I'd be nice if someone had an under hood pic of a TGP to make sure I got stuff routed right. Edited May 23, 2012 by bkaab Quote Link to comment Share on other sites More sharing options...
Garrett Powered Posted May 24, 2012 Report Share Posted May 24, 2012 studded bolt and nut go to the wastegate actuator on the UIM. that heat shield goes under the PMIII. click on my garage pics for engine bay shots. Quote Link to comment Share on other sites More sharing options...
1blkgtp422 Posted May 28, 2012 Report Share Posted May 28, 2012 The silver plate with the tab hold the inlet and outlet fuel lines down below the TB. And one of those bolts secures it down. Quote Link to comment Share on other sites More sharing options...
intern8tion9l Posted May 31, 2012 Report Share Posted May 31, 2012 there is a hose that runs between the coolant overflow bottle and the radiator filler neck. there is also a vent tube on the overflow bottle cap that just kinda dangles freely Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.