Jump to content

6 Piston Wilwood kit


dohc v6
 Share

Recommended Posts

Few questions:

 

1: there really is no chance a 16 inch wheel could clear those is there?

 

2: are there any full on pictures of that car with those centerlines, I love those wheels and would love to see a good picture of a z34 with them on it

 

3: I have 96' front knuckles, would I need to swap back to the early ones to fit these?

Link to comment
Share on other sites

These are stock knuckles, not modified at all. They more than likely wont fit under a 16" wheel. They might though. I know UI have seen 13" brakes under fat 16" wheels before. These are the 10.9 rotors knuckles.

 

Mark

Link to comment
Share on other sites

SO-

calipers are $350 each

rotors are $200 each

brackets are $125 with the bolts needed

 

They will fit 93 and older stock spindles.

 

Can a bracket be made to use the mounting for a 97+.

 

Then, monte, f/bird, vett and etc all become possible.

Link to comment
Share on other sites

What specific model of caliper/ pad did you use?

 

what gauge is the adapter plate you have made? any better pictures of the mounting hardware?

 

can you get a measurement of the center of the axle to the furthest edge of the caliper?

Link to comment
Share on other sites

What specific model of caliper/ pad did you use?

 

what gauge is the adapter plate you have made? any better pictures of the mounting hardware?

 

can you get a measurement of the center of the axle to the furthest edge of the caliper?

 

The calipers are Wilwood dynapro's. The bracket we made is 3/8 steel. I can tell you that a 17" wheel with a 42mm offset has about 1/8" of clearance. Thanks for the feeback rating too ;).

 

Mark

Link to comment
Share on other sites

Thanks for the useless camcover!

 

1/8th... are you talking caliper to face of the wheel clearance or caliper to inside of the wheel clearance?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...