Jump to content

The Parts Number Thread!!


White93z34
 Share

Recommended Posts

Someone suggested we have a Thread dedicated to parts numbers, And that is an excellent Idea. I'm going to keep this open and you can post whatever you feel is helpful to the community. I will be deleting the replys after I paste them into this Post to keep it uncluttered.

 

Unless noted these are Manufacturer Part numbers and will be the same regardless of who you buy from

 

 

Brakes:

 

Power Master III Parts:

88927271 / 18M874 - accumulator

88927270 - pressure switch

SIA Electronics - Call for pricing and parts (800) 737-0915

 

Goodridge SS brake lines:

'88-'90 W - GS12264

'94-'97 W - GS12237

 

Suspension:

GMPP rear trailing arms - 12498649

Police Package Impala trailing arms- 15856683 - QTY2

Hub to knuckle bolts(1 and 1.5 gen front only) - 10104548

 

KYB GR2/Excel G Front Sturts - 366004

KYB GR2/Excel G Rear Struts - 236003

 

Energy Suspension greasable poly sway bar bushings (when using 34mm front sway bar) - 9.5160G and 9.5167G

 

Rear sway bar bracket - 10259660

 

 

Engine:

Oil Filters:

2.8/3.1/3x00/3800 - PF47

3.4 - PF52

Note: You can use the PF52 on just about anything that calls for a PF47.

 

Knock Sensor (genII 60*)- 10456208

Crank Position Sensor (CPS) (GenII 60*) - 10456555

 

oil/distributor drive O-Ring - 10477565

 

Oil plug bolt thread size - M12-1.75

Oil drain plug - 10017615

aftermarket Magnetic plug - Motormite "Oil-tite!" 65372

Dorman Quick Disconnect 800-401 - Cooling System Connector that screws into the LIM of 3.1mpfi, earlier 3100sfi, earlier 3400sfi, and 3.4DOHC cars.

 

3.4 DOHC Timing Belt Parts:

24502982 - Belt

24503561 - Tensioner Pulley

10162013 - Tensioner Pulley Bolt

24503859 - Idler Pulley, 2 needed

24503860 - Tensioner Actuator

24503861 - Tensioner Actuator mounting plate.

 

89017825 - Improved aluminum Series II 3800 intake gaskets

 

2.8/3.1 Throttle Body gasket - Fel-pro 60728

 

91-97 LQ1 Solid rubber engine mount - DEA/Pioneer P/N - A2555 (Available from Autozone)

88-93 2.8/3.1 Solid rubber engine mount - DEA/Pioneer P/N - A2660 (Available from Autozone)

94-96 3100 Solid rubber engine mount - DEA/Pioneer P/N - A2796 (Available from Autozone)

97-04 W-Body Solid rubber engine mount(EXCEPT 3.5L Intrigue) - DEA/Pioneer P/N - A2796 (Available from Autozone)

 

2.8/3.1 Oil Pressure Sending Unit w/ Gauge (Seems to be for any 60 degree W from 89-90): GM part number 10201491.

 

 

Transmission:

 

4T60-E VSS - 10456034

 

4T60-E Parking Brake Actuator - 24213560

 

Getrag 284

Spec Stage II Clutch - SC272

Output Shaft Seals Timken P/N - 2003N

284 select cable - 10192248

284 Slave Cylinder - 12550806

 

282/284 Clutch pedal bushing - 14091384

 

Interior:

 

GM W-body Door Key "C": 12390306

GM W-body Ingition Key "D": 26002688

GM W-body Ignition key "E": 26024974

 

 

Body/Misc:

 

97-00 - Regal GS and Grand Prix GTP fuel pump resistor - 88951182

 

1st gen Hood release cable - 10167401

 

94-96 GP Fender flare Clips - 10229345

 

Power steering rack pressure switch - 10238816

 

Subframe Bushings

14088025 - QTY2

14088026 - QTY2

14088027 - QTY2

14088028 - QTY2

 

Subframe Bolts

10220561 - QTY4

 

Subframe Retainers

10139080 - QTY2

10203413 - QTY2

 

Fuel Tank Lines for 88-91 W bodys

10062887 PIPE ASM FUEL RTN

10062888 PIPE ASM FUEL FEED

 

AC Accumulator:

4 Season's PN# 33206 - VERY useful for 284 cars and Turbo Grand Prix

Edited by White93z34
Link to comment
Share on other sites

  • 3 months later...

1st Gen GP parts catalog scans:  Use the option to download the image and you'll be able to view them full size and also zoom in so you can clearly view all part numbers.

 

 

Edited by mfewtrail
invalid link
Link to comment
Share on other sites

I have the GP sedan parts catalog pages finally that I have been meaning to scan and post up as well. The GP coupe pages cover a lot but for the few body components that are different, the sedan pages should be a nice addition :)

Link to comment
Share on other sites

  • 3 months later...

Injector O-rings:

 

multitech 1

BWD 274573 (formerly GP Sorensen 800-9220) brown silicone

*kit contains 12 o-rings, not 8 as sometimes listed

*half the kit will do the top half of multitech 2 injectors.

(carried by Advance autoparts)

*** BWD 274572 contains 8 rings... buy two and it can be cheaper than buying the 12 box

 

mutlitech 2

ACD# 217-1427 GM#12570621

Link to comment
Share on other sites

  • 1 month later...

Poly Dogbone bushings, these require drilling:

 

Energy Suspension: 3-7103 R

R is for Red, you can get them in black is well which is G

These are torque arm bushings for a fiero

Link to comment
Share on other sites

  • 3 months later...
  • 3 weeks later...
  • 4 months later...
  • 5 months later...

MOOG suspension bushings for GEN 1/1.5 sway bars (blue rubber? ones)

 

(34mm bar) inner: MOOG Part # K6457 {Sway Bar Bushing Kit} Front Suspension; To Frame; w/1-5/16" Bar

(all bars) outer: MOOG Part # K6641 {Sway Bar Bushing Kit} Front Suspension; To Control Arm

Edited by Crazy K
Link to comment
Share on other sites

  • 1 month later...
  • 1 month later...
  • 7 months later...

I just tried to order a new vac spider #10114903 for my TGP from gmpartsdirect.com and the order was cancelled because the part is no longer available.

Figured that might be good info to get out there. These vac spiders are becoming harder to get.

Link to comment
Share on other sites

  • 3 months later...

Something that is very recommended when doing deep engine work is to use revised problem solving intake gaskets so you don't have the risk of having to do the job twice, or worse. here they are:

 

3800 gasket sets:
FEL-PRO Part # MS98014T PermaDryPlus®; Intake Manifold Gasket Set
FEL-PRO Part # VS50465R PermaDry® Valve Cover Gasket
*head gaskets and upper intake gaskets may vary by application in normally aspirated verses forced induction*

 

3x00
Metal Intake Manifold Gaskets FEL-PRO Part # MS98004T PermaDryPlus®; with upper gaskets and seals. for SMALL port intake, L82 (Vin M)
Metal Intake Manifold Gaskets FEL-PRO Part # MS98003T PermaDryPlus®; with upper gaskets and seals. for LARGE port intake, LG8 3100 (Vin J), LA1 3400 (Vin E)

Link to comment
Share on other sites

  • 3 weeks later...
  • 1 month later...
  • 8 months later...

LQ1 Cam gear bolt (94-up...maybe 91-93?)

 

These are the 4 bolts that secure the cam gears to the cams.

 

GM P/N 10127521

Link to comment
Share on other sites

  • 1 month later...

Coolant Pipe. Original Thread Here: http://www.w-body.com/showthread.php/77468-repairing-ruptured-coolant-pipe

 

The original part is GM # 10145142. There's an aftermarket Dorman replacement, #626-100. They run about $30 shipped on eBay.

http://www.ebay.com/itm/DORMAN-626-100-Heater-Hose-/390597626865?pt=Motors_Car_Truck_Parts_Accessories&hash=item5af16ecbf1&vxp=mtr

 

A rubber hose might last longer, but the OEM style part should also last at least a decade.

Edited by runt
Link to comment
Share on other sites

  • 1 year later...
Someone suggested we have a Thread dedicated to parts numbers, And that is an excellent Idea. I'm going to keep this open and you can post whatever you feel is helpful to the community. I will be deleting the replys after I paste them into this Post to keep it uncluttered.

 

Unless noted these are Manufacturer Part numbers and will be the same regardless of who you buy from

 

 

Brakes:

 

Power Master III Parts:

88927271 / 18M874 - accumulator

88927270 - pressure switch

SIA Electronics - Call for pricing and parts (800) 737-0915

 

Goodridge SS brake lines:

'88-'90 W - GS12264

'94-'97 W - GS12237

 

Suspension:

GMPP rear trailing arms - 12498649 <- On indefinite national backorder

Police Package Impala trailing arms- 15856683 - QTY2

Hub to knuckle bolts(1 and 1.5 gen front only) - 10104548

 

KYB GR2/Excel G Front Sturts - 366004

KYB GR2/Excel G Rear Struts - 236003

 

Energy Suspension greasable poly sway bar bushings (when using 34mm front sway bar) - 9.5160G and 9.5167G

 

Rear sway bar bracket - 10259660

 

 

Engine:

Oil Filters:

2.8/3.1/3x00/3800 - PF47

3.4 - PF52

Note: You can use the PF52 on just about anything that calls for a PF47.

 

Knock Sensor (genII 60*)- 10456208

Crank Position Sensor (CPS) (GenII 60*) - 10456555

 

oil/distributor drive O-Ring - 10477565

 

Oil plug bolt thread size - M12-1.75

Oil drain plug - 10017615

aftermarket Magnetic plug - Motormite "Oil-tite!" 65372

Dorman Quick Disconnect 800-401 - Cooling System Connector that screws into the LIM of 3.1mpfi, earlier 3100sfi, earlier 3400sfi, and 3.4DOHC cars.

 

3.4 DOHC Timing Belt Parts:

24502982 - Belt

24503561 - Tensioner Pulley

10162013 - Tensioner Pulley Bolt

24503859 - Idler Pulley, 2 needed

24503860 - Tensioner Actuator

24503861 - Tensioner Actuator mounting plate.

 

89017825 - Improved aluminum Series II 3800 intake gaskets

 

2.8/3.1 Throttle Body gasket - Fel-pro 60728

 

91-97 LQ1 Solid rubber engine mount - DEA/Pioneer P/N - A2555 (Available from Autozone)

88-93 2.8/3.1 Solid rubber engine mount - DEA/Pioneer P/N - A2660 (Available from Autozone)

94-96 3100 Solid rubber engine mount - DEA/Pioneer P/N - A2796 (Available from Autozone)

97-04 W-Body Solid rubber engine mount(EXCEPT 3.5L Intrigue) - DEA/Pioneer P/N - A2796 (Available from Autozone)

 

2.8/3.1 Oil Pressure Sending Unit w/ Gauge (Seems to be for any 60 degree W from 89-90): GM part number 10201491.

 

 

Transmission:

 

4T60-E VSS - 10456034

 

4T60-E Parking Brake Actuator - 24213560

 

Getrag 284

Spec Stage II Clutch - SC272

Output Shaft Seals Timken P/N - 2003N

284 select cable - 10192248

284 Slave Cylinder - 12550806

 

282/284 Clutch pedal bushing - 14091384

 

Interior:

 

GM W-body Door Key "C": 12390306

GM W-body Ingition Key "D": 26002688

GM W-body Ignition key "E": 26024974

 

 

Body/Misc:

 

97-00 - Regal GS and Grand Prix GTP fuel pump resistor - 88951182

 

1st gen Hood release cable - 10167401

 

94-96 GP Fender flare Clips - 10229345

 

Power steering rack pressure switch - 10238816

 

Subframe Bushings

14088025 - QTY2

14088026 - QTY2

14088027 - QTY2

14088028 - QTY2

 

Subframe Bolts

10220561 - QTY4

 

Subframe Retainers

10139080 - QTY2

10203413 - QTY2

 

Fuel Tank Lines for 88-91 W bodys

10062887 PIPE ASM FUEL RTN

10062888 PIPE ASM FUEL FEED

 

AC Accumulator:

4 Season's PN# 33206 - VERY useful for 284 cars and Turbo Grand Prix

 

 

 

 

 

I AM LOOKING FOR GM PART #24503861 DO YOU KNOW WHERE I CAN GET THIS. I KNOW THAT IT IS DISCONTINUED.

Link to comment
Share on other sites

  • 3 months later...

for the most well done(crustiest) of w-bodies:

 

having to replace all of the fittings due to running new brake lines from front to rear, it appears that all of the line nuts in the braking system of the 95 monte carlo uses a M10-1.0 thread with the exception of 2 of the master cylinder line nuts, those appear to be M11-1.5. I imagine this applies to at least all w-bodies with ABS VI, but the non-ABS cars are probably similar/identical. can't speak for PM3.

Link to comment
Share on other sites

  • 4 months later...

- Dorman trailing arm replacements (square tube, not U-channel like the stockers) p/n 905-501 (pair)

- Dorman trailing arm brackets to frame (these usually rot out) p/n 523-023 (97-up)

- Dorman front sway bar (33mm diameter) p/n 927-100 (97-up)

- Dorman rear sway bar (16mm diameter) p/n 927-110 (97-up)

- Moog "problem solver" front end links (urethane bushings, barrel nut, extra thick center section) p/n K700527 (97-up)

Link to comment
Share on other sites

  • 5 months later...
  • 4 years later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...