UA-65274002-1 Jump to content

bodeen2007

Members
  • Content Count

    351
  • Donations

    $0.00 
  • Joined

  • Last visited

Everything posted by bodeen2007

  1. Thanks everybody Sent from my iPhone using Tapatalk
  2. http://www.w-body.com/topic/36343-did-some-work-on-the-moo-cow-update-with-more-pics/ post about my old car Sent from my iPhone using Tapatalk
  3. Hello, everyone name is Adam was active on here for a long time with a 94 lumina that looked like it had a disease damn gm paint problems . Sold the lumina had a grandprix for a bit got a Mazda 3 and some other cars . Just picked up an 04 Buick century with 90,000 miles for free has the normal rotten rocker panels but otherwise pretty clean only have one pic in the process of doing all new brake lines and brakes front and rear . Already have ordered new rocker panels and will be going to pull a part to get the ground effects off of a regal to cover my crimes lol Sent from my iPhone using Tapatalk
  4. if they are parked outside try considering a solar battery tender or a trickle solar charger . i run the solar trickle charger in the lumina . haven't had any problems with it . the lumina is currently sitting in the driveway with the panel sitting on the dash board . i checked the battery yesterday and it is at 12 volts . that with a known draw on the system
  5. go get them balanced somewhere else the people at sams club are idiots . the put almost 5 ounces on one of my z34 rims . i redid them at my dads shop and got the rim down to .75 ounces
  6. you could always make a spacer out of a piece wood to go between the door and the speaker . but those might work they look alot shallower then the speakers i tried to mount
  7. i have tried before and there is room if you use a custom pod. i think i tried to mount the speaker straight to the door and either the window hit ithe magnet or the regulater hit it. i cant remember . was trying to use a pod out of a blazers rear door but could never get it to look right plus i had to get rid of the little tray at the bottom of the door . i was also trying to mount 6.5" mids so u might be able to do it with smaller speakers . good luck hope u have better luck then me
  8. gonna have to be a custom build . i dont think any of the sedans came with factory door speakers. i think some of the lumina coupes did with the bose setup .
  9. also this is the amp i have driving those speakers http://www.onlinecarstereo.com/CarAudio/p_25252_Soundstream_PX4580.aspx i've never had any problems with the boss one's i posted i just got rid of them when i upgraded my whole system . they worked great with my stock headunit . plus their cheap as hell .
  10. i agree about the infinitys but i was giving him a suggestion on stockish speakers. if he wanted aftermarket speakers i would have posted these fronts http://www.onlinecarstereo.com/CarAudio/p_16314_Soundstream_SST46.aspx rears http://www.onlinecarstereo.com/CarAudio/p_16318_Soundstream_SST69.aspx these are what i have in my car now and i love them but i also have an amp driving them and a soundstream hu
  11. i went with these to replace my front stock speakers http://www.parts-express.com/pe/showdetl.cfm?Partnumber=265-386 and these to replace my rear http://www.parts-express.com/pe/showdetl.cfm?Partnumber=265-380
  12. ad-244 fits following cars Buick Regal 99-04 3.8L Chevy Impala 00-08 3.4L, 3.5L, 3.8L, 3.9L Chevy Lumina 00-01 3.1L Chevy Monte Carlo 00-07 3.4L, 3.5L, 3.8L Oldsmobile Alero 99-04 2.4L, 3.4L Oldsmobile Cutlass 97-99 3.1L Pontiac Bonneville 00-05 3.8L Pontiac Grand Am 96-05 2.4L, 3.4L Pontiac Grand Prix 99-08 3.1L, 3.8L Pontiac Sunfire 96-02 2.4L
  13. i still have them but they are mounted on my 97 lumina . but pullapart always has them . and yes they work on our early lumina's. i had them on my lumina

  14. i could be wrong but everything i have read say u only need the wiring adapter which u said u have
  15. just get some insta cure ca glue i have used it for this exact reason and it works great . u can find it at any hobby shop or http://www.parts-express.com
  16. keep trying. it's a process of trial and error . it took me months of trying to figure out how to cast stuff when i was building models but i got to the point where i could do it in my sleep . U are more brave then me i won't even try to do automotive parts the closest i've ever came was doing a set of wheels for my evader r/c truck....
  17. gmpartsdirect.com prices reflect quantity Subframe Bushings 14088025 - QTY2 = 10.56 14088026 - QTY2 = 12.58 14088027 - QTY2 = 14.08 14088028 - QTY2 = 19.66 Subframe Bolts 10220561 - QTY4 = 9.32 Subframe Retainers 10139080 - QTY2 = 21.82 10203413 - QTY2 = 12.90
  18. you do not want diesel amps they suck. i had one hooked to my earthquake db12's their power output sucks. It gets real hot and eventually crap's out. mine lasted 6 months . I now run a Soundstream TRX700D 700W Class D Subwoofer Amplifier. never looked back . Like they say u get what u pay for.
  19. cause its a trooper . it has never let me down and it's like the energizer bunny it just keeps going and going and going.........
  20. denso are good plugs so are autolite and ac delco but don't get bosch plugs they fucking suck ass
  21. nope still waiting for my prototypes try calling the guy a few times and he doesn't answer but thats ok cause i have a freshly rebuilt engine sitting in my garage that is gonna go in my camaro if he doesn't call soon. hey again, i take it theres no hope for the cutlass lenses? lol nope not till i find another person to make the lenses . but i did get a nice engine lol
  22. if i can find a screen i have a eeepc to use that is collecting dust
×
×
  • Create New...