Leaderboard

My car has been missing this piece for as long as I and the guy before me have owned it. But today I got a "care package" in the mail from jiggity76 and inside was the moulding I have been missing and it is in WHITE. With about 20 minutes of my time disassembling and polishing, it's as close to NOS as a used piece is going to get. Now, a missing key piece to the car is in place.......

Disassemble Clean with a tooth brush and good cleaner (I use a really good commercial glass cleaner) Polish with a good polishing (not rubbing) compound (I use 3M Perfect-It products) Brush touch if necessary Wax Reassemble and install An FYI: I have found that the ones with a angle to them (very front and very rear) tend to be difficult to remove the stainless strip and even harder to reinstall. What I do is to grind about 1/32" - 1/16" off the pointed end as well as file the edges smooth. The trim goes in like butter then.

Yeah, unfortunately the flash went off so the picture isn't the greatest but trust me, it looks great on there. After all these years, no more exposed holes in the quarter panel. THANKS MAN!