tonytoca_87 Posted May 8, 2018 Report Share Posted May 8, 2018 Hi eveyone has anyone had this same issue trying to get the brass part of the cylinder to align with the frame? It seems like its under pressure and stuck to the piston cylinder. I took it off like an idiot last year and now im trying to put it back together for my top isnt going up without me using my own strength. Any help would be appreciated. Quote Link to comment Share on other sites More sharing options...
GabsOlds Posted May 12, 2018 Report Share Posted May 12, 2018 Stick a big screw driver through the hole from the bottom to rotate it. It should also pivot up and down at the pin. To extend, use the up/down button for the convertible top. tonytoca_87 1 Quote Link to comment Share on other sites More sharing options...
tonytoca_87 Posted June 5, 2018 Author Report Share Posted June 5, 2018 Thanks 4 your reply. I push the top botton and it did the job. Thumbs up Imp558 1 Quote Link to comment Share on other sites More sharing options...
GabsOlds Posted June 6, 2018 Report Share Posted June 6, 2018 Glad you were able to work it out. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.