Jump to content

L67 In A 1st Gen W-Body Grand Prix


1989 Pontiac Se
 Share

Recommended Posts

You can not bolt a second gen subframe into a first gen. You can do an L67 and 4T65 but you need the CV tulips from an HD car and there were different size tulips for different car lines so it should be a second gen W-Body.

 

Wiring to make it run is a hurdle, making the gauges all work is a hurdle. This could have been covered in one thread, like this one: http://www.w-body.com/topic/56149-89-grand-prix-complete-3800-drivetrain-and-powertrain-swap/?do=findComment&comment=1249673

  • Like 1
Link to comment
Share on other sites

You can not bolt a second gen subframe into a first gen. You can do an L67 and 4T65 but you need the CV tulips from an HD car and there were different size tulips for different car lines so it should be a second gen W-Body.

 

Wiring to make it run is a hurdle, making the gauges all work is a hurdle. This could have been covered in one thread, like this one: http://www.w-body.com/topic/56149-89-grand-prix-complete-3800-drivetrain-and-powertrain-swap/?do=findComment&comment=1249673

 

You can bolt the 2nd gen subframe in a 1st gen w-body, I've done it... Suspension becomes a headache though...

Link to comment
Share on other sites

Do you have pictures of the 2G cradle in a 1G?

 

To OP: The L67 swap has been done no less than 59,493 times. Google is certainly your friend here. Short answer, you need to play a lot of GM legos and start with a W-car 3800 (to make it easiest).

Link to comment
Share on other sites

Gen1 control arms are bolted to the K frame, and our struts are martian. 

 

Swapping the Gen2 frame, doesn't that mean that the whole suspension has to be reworked? 

 

I remember Miko's car... that thing was all modded up.

Link to comment
Share on other sites

Yes can be done.

-3800 motor and trans from a w-body(mounts are different between the different chassis. Just makes it easier).

-Inner tulip cv joint from Same trans out axle from 1g w

-Wiring harness 98-99 Monte Carlo/lumina ltz, need to mod c100 conector but easy enough

-downpipe from same monte/lumina

-power steering lines from monte/lumina

-heater core lines from Monte/lumina

-rad and hoses from 3800 car

Motor will drop right into the subframe and into the car no issues.

You can use the 2g wiring but you're into more wiring of the c100 connector as they're completely different.

Link to comment
Share on other sites

  • 5 years later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...