1989 Pontiac Se Posted December 7, 2017 Report Share Posted December 7, 2017 I have an '89 Grand Prix with a 2.8 LHO. Can I bolt a complete drivetrain from a 6th Gen Grand Prix with an L67 under this car. Will the K frame line up with the factory frame bolt holes or will I need to drill new mounting points? Is this a hard swap to do? Sent from my Z982 using Tapatalk Link to comment Share on other sites More sharing options...
White93z34 Posted December 7, 2017 Report Share Posted December 7, 2017 That is a lot of questions, I recommend looking around and doing some research. its for sure a whole lot more then snap it together like legos short answers: yes, with work... engine/transmission at least. no it will not Depends on what you consider hard Link to comment Share on other sites More sharing options...
White93z34 Posted December 8, 2017 Report Share Posted December 8, 2017 this thread is closed as you have another thread on the exact same topic Heartbeat1991 1 Link to comment Share on other sites More sharing options...
Recommended Posts