Mark 1997 Cutlass Coupe Posted April 21, 2015 Report Share Posted April 21, 2015 My 1997 Cutlass Coupe has the dark gray leather seats. I found a 1993 Cutlass with what looks like the exact same color seats. Did the color change from one year to the next? My car is nowhere near the junk yard, so I can't just pull the seat and compare. The seat I found is literally perfect. Any help would be appreciated. Quote Link to comment Share on other sites More sharing options...
Nas Escobar Posted April 21, 2015 Report Share Posted April 21, 2015 If your seats are charcoal gray, then it is the same color, GM didn't add or change colors, just took away colors. After a while you could only get charcoal or tan leather seats. Quote Link to comment Share on other sites More sharing options...
Mark 1997 Cutlass Coupe Posted April 21, 2015 Author Report Share Posted April 21, 2015 Thanks. It just seemed weird that over all that time they wouldn't change the color at all. Quote Link to comment Share on other sites More sharing options...
Nas Escobar Posted April 21, 2015 Report Share Posted April 21, 2015 Your seats are something like this right? Here's a pic of 93/94. 95 may have darkened since the interior changed. Just make sure that the seats don't have a bluish hue to em. I think GM never changed the color since they were supposed to be "black" in color but were more grayish Quote Link to comment Share on other sites More sharing options...
Mark 1997 Cutlass Coupe Posted April 21, 2015 Author Report Share Posted April 21, 2015 The top photo is my car exactly. I guess I will just get the seat because they are obviously getting harder to find. I was going to transfer the skin (the seat I found is a passenger side) to the worn driver side of my car. I found another perfect passenger seat last year, and it is still in my basement. I plan on keeping my Cutlass for good, so this one would just be a spare. Quote Link to comment Share on other sites More sharing options...
Nas Escobar Posted April 21, 2015 Report Share Posted April 21, 2015 Well you know, if you learn how to sew, you could make your own seat skin, probably out of real leather too if you wanted. But yeah, just grab it, there's many ways to change the color of the skin. Someone on here dyed their seats full black. Quote Link to comment Share on other sites More sharing options...
Mark 1997 Cutlass Coupe Posted April 22, 2015 Author Report Share Posted April 22, 2015 Are there any specialty tools needed to take the seat back off from the bottom? I'm away from home, and don't have many tools available, and the car I'm going to use to take the seat home doesn't have enough room to take the seat home in one piece. And, I have a quarter inch socket set, and does anyone know/remember if a common size will get the seat bolts themselves? As I said earlier, I got another passenger seat awhile ago, but I can't remember what size socket I used, or if it was something special. Quote Link to comment Share on other sites More sharing options...
Nas Escobar Posted April 22, 2015 Report Share Posted April 22, 2015 A normal 8mm socket takes the bracket off the seat. As far as taking the top off from the bottom, not entirely sure on that one. If your car has foldable rear seats, I would recline the Cutty seat all the way back and stuff it through the trunk. Quote Link to comment Share on other sites More sharing options...
Mark 1997 Cutlass Coupe Posted April 22, 2015 Author Report Share Posted April 22, 2015 If you get a chance, could you look at your own Cutlass? I'm out of state, and the only way I'm going to be able to get the seat back to Pittsburgh is to take it apart. Plus, the junk yard is about 100 miles from me (I'm heading that way anyway on Friday) and I would like to get in and out of there quickly, if possible. I appreciate your help! Quote Link to comment Share on other sites More sharing options...
Nas Escobar Posted April 22, 2015 Report Share Posted April 22, 2015 Yeah I'll play around with it man. Quote Link to comment Share on other sites More sharing options...
Crazy K Posted May 1, 2015 Report Share Posted May 1, 2015 13mm is the common size for the bolt that hold the top and bottom together Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.