Jump to content

Regal stumbling and not shifting


1of1547
 Share

Recommended Posts

This morning I took my Regal out. It's a 96 coupe with approx. 67K on it. A couple of miles from the house it started loosing power and stumbling. So I did a U turn and headed home. On the way home I noticed that it would act like it wanted to shift hesitate and not shift, then do it again, and again ,and again. It would finally shifted at approx. 5k. And took forever for it to get there. When I got home I pulled the plug wires off of the coilpacks and noticed the bottom tower on the second and third coil was really corroded badly. I cleaned them up the best I can and took it for another drive. It ran good for the first 1/4-1/2 mile. Then it started the same thing. I'm going to replace the coilpacks and wires. Is this the shifting problem also? Or is the shifting problem the big problem and I found the bad coils in the process? And they are two separate problems?

Thanks

Link to comment
Share on other sites

  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...