Well I took the car apart last fall because I had to make my own heater core hose and I just putting stuff back together. So I think 1 or 2 of the bolts went to that. And where does the hose thats on the coolant overflow cap go to.
Also I'd be nice if someone had an under hood pic of a TGP to make sure I got stuff routed right.
Results 1 to 4 of 4
Hybrid View
-
05-23-2012, 01:36 AM #1
- Join Date
- Sep 2011
- Location
- Adrian, MI
- Posts
- 160
- Thanks
- 2
- Thanked 11 Times in 8 Posts
Some extra parts, don't know where they go.
Last edited by bkaab; 05-23-2012 at 01:55 AM.
2001 Pontiac Grand Prix GT-12.71@107.92mph
1990 Pontiac Turbo Grand Prix-15.63@86.38mph
1996 Pontiac Grand Prix SE-17.32@80.23mph
1985 Pontiac Fiero 2m4-18.13@73.63mph
-
05-23-2012, 08:20 PM #2
- Join Date
- Jul 2005
- Location
- OREGON
- Posts
- 4,319
- Thanks
- 85
- Thanked 93 Times in 80 Posts
studded bolt and nut go to the wastegate actuator on the UIM. that heat shield goes under the PMIII.
click on my garage pics for engine bay shots.
-
05-28-2012, 08:15 AM #3
- Join Date
- Dec 2010
- Posts
- 25
- Thanks
- 1
- Thanked 0 Times in 0 Posts
The silver plate with the tab hold the inlet and outlet fuel lines down below the TB. And one of those bolts secures it down.
2000 GTP
2001 Grand AM GT
1990 Mclaren Turbo GP
1995 K2500 TBI 454
2011 GMC Sierra SLE
-
05-30-2012, 11:12 PM #4
- Join Date
- Mar 2005
- Location
- Long Island, NY
- Posts
- 3,240
- Thanks
- 73
- Thanked 153 Times in 116 Posts
there is a hose that runs between the coolant overflow bottle and the radiator filler neck. there is also a vent tube on the overflow bottle cap that just kinda dangles freely
Reply With Quote
