What would I need to remove my a/c???

[90TGP]

Ok, my A/C doesn't work, and would have to be converted to R13 to work anyway. I want to install my FMI and was thinking of running the IC pipe through the area the stock intercooler and a/c condensor is.

How would I go about removing the a/c condensor and everything attached to it?

Is their an a/c idler pully I can put in place of the a/c pully?

If their is no pully available, what size belt would I need?

How much weight would be removed from the car when removing the a/c unit?

[93CutlassSupreme]

Ok, my A/C doesn't work, and would have to be converted to R13 to work anyway.

don't you mean 134A?

you're not going to save much weight by removing your a/c

[TurboSedan]

If their is no pully available, what size belt would I need?

How much weight would be removed from the car when removing the a/c unit?

i would be interested in knowing how much weight you could take off also. i know the compressor is pretty heavy, and all the lines and condensor weight probably adds up.

i would just look for a belt from any 2.8/3.1 MPFI car that didn't come with A/C maybe...
good luck
joshua