Need some vert parts (frame parts, brake bar, dome light), and some generic w parts!

[Timm]

Looks like within a week, Ive got just about everything!!! Thank you all! Just a few odds and ends left! I'll take a closer look at the brake light bar to see if I really need a new one or not. Probably just suck it up and fix it.
But this is up to date as of 2/9/12 as far as what I need and what's been taken care of!

This knob (The factory one, not the one that looks like it came off a old Zenith!)
Got this from 95 VERT (Perry)

A graphite colored cover for the hood release.
Got this from GOT2BGM (Matt)

Drivers door weatherstripping (Vert specific)


A graphite colored arm rest, since the previous owner thought it'd be fun to play with the cigarette lighter...

(This can be broken into the two parts, so long as you can get the bottom hinge part and they match up pretty good. I've done the 2 bolt's through the plastic mod on every one I've owned.

This front alignment? pin for the verts, it's the one that is in the front and aligns the top with the windshield frame.


The plastic dome light cover with the rubber buttons, my local yard decided it would crush the only vert there, and got rid of all but three 1st gens. They used to have 3 rows of 10 each. :-(
Got this from GOT2BGM (Matt)

Not sure what to call this one, its a bracket that goes from about half way down the rear quarter glass, goes towards the back horizontally, then bends around the corner.
Got this from Red93Cutlass (Jeff)

I do need the rear brake light for sure. This one is cracked on bottom.
Got this from GOT2BGM (Matt)

I can probably weld the plastic back onto this one, but if someone has one and the price is right (don't worry about color) I'd love it! And even better, I'll take the pieces that go along the sides if they're not broken on the mounting points if you don't want too much!


Anyways, shipping shouldn't be a problem at all on the smaller things, but parts like the brake light bar or armrest would be easier to pick up if anyone's around Mid to lower MI.
Try to give me shipping to 48423!

Thanks for always having my back and all the info I need guys!!!

-Tim

[95 vert]

I've got the knob, airbag and console lid. 40 bucks.
I think it'll all fit in a USPS large priority box (14.00)

[GOT2B GM]

I've got the 3rd brake light, the brake light surround, graphite hood release cover (with a tiny nick out of it-pictured), and the dome lense buttons (just the buttons)



Shipping is $$$ with the brake light surround (size of the box) so $100 for everything SHIPPED, or $45 for everything except the brake light surround SHIPPED.

[Red93Cutlass]

I've got you covered on that Top Bracket -$25.00 plus shipping

[Timm]

PM'd everyone, I won't be needing the steering wheel or air bag anymore, as I've purchased a whole steering column, since I needed a new ignition cylinder, turn signal switch, steering wheel and air bag, I figured $60 for a whole column would be the best route to take.

I will be out of town for the rest of this week, so it will be rare that I'll be replying to any posts or PM's, but I WILL get to them! Thank you all for the speedy responses!

-Tim