It is what it is. If you have either of these laying around let me know
The motherboard needs to have a 478 or LGA 775 Pentium 4 processor socket and take 184 pin RAM. I also need SATA connections on it. If it is a 478 please include the processor. If it is LGA 775 you don't have to.
The Xbox 360...no real preferences. It would be nice to have AV/power cables, a hard drive and a controller but far from necessary for the right deal.
Let me know what you have and what you'd like for it. I'm not looking to spend a ton of money but I also will not say no to a GOOD deal.
Results 1 to 7 of 7
-
01-13-2011, 10:20 AM #1
- Join Date
- Aug 2010
- Posts
- 1,138
- Thanks
- 391
- Thanked 166 Times in 118 Posts
WTB: Socket 478 or LGA775 P4 motherboard and RRoD 360
this IS a General Motors product and the general rule is that nothing should make actual sense.This message was sent from my 2012 Cadillac CTS
Originally Posted by pwmin
who knew a pansy-ass 2.8L V6 would sound so glorious
-
01-13-2011, 12:53 PM #2
- Join Date
- May 2007
- Posts
- 7,232
- Thanks
- 601
- Thanked 294 Times in 213 Posts
I have a motherboard with 478 socket, 800mhz bus, and 184pin DDR, and two sata ports. Its an Asus board. I can get you more info on Thursday next week when I get back to Chicago from my vacation. I think its a P4800D-X, but I don't remember it exactly.
Sent from my HTC Magic using Tapatalk
-
01-13-2011, 01:13 PM #3
- Join Date
- Aug 2010
- Posts
- 1,138
- Thanks
- 391
- Thanked 166 Times in 118 Posts
Cool, thanks. Let me know.
The sooner the better, if someone else has something before then let me knowthis IS a General Motors product and the general rule is that nothing should make actual sense.This message was sent from my 2012 Cadillac CTS Originally Posted by pwmin
who knew a pansy-ass 2.8L V6 would sound so glorious
-
01-19-2011, 11:42 AM #4
- Join Date
- Aug 2010
- Posts
- 1,138
- Thanks
- 391
- Thanked 166 Times in 118 Posts
Bump...got a board. Still looking for RRoD 360's!!
this IS a General Motors product and the general rule is that nothing should make actual sense.This message was sent from my 2012 Cadillac CTS Originally Posted by pwmin
who knew a pansy-ass 2.8L V6 would sound so glorious
-
01-21-2011, 09:12 AM #5
- Join Date
- Jun 2004
- Location
- Flint, Mi
- Posts
- 10,099
- Thanks
- 1,081
- Thanked 569 Times in 398 Posts
I don't mean to muck up this thread, but I'm also looking for a LGA775 board, if anyone was looking at this thread...
Also, I might know of someone with an RROD xbox, I'll let you know.
-
01-22-2011, 01:07 PM #6
- Join Date
- Aug 2010
- Posts
- 1,138
- Thanks
- 391
- Thanked 166 Times in 118 Posts
As long as I can get it super cheap. I'm about to enter the wonderful world of reballing and would like to test my skills before attacking other people's 360's.
this IS a General Motors product and the general rule is that nothing should make actual sense.This message was sent from my 2012 Cadillac CTS Originally Posted by pwmin
who knew a pansy-ass 2.8L V6 would sound so glorious
-
02-03-2011, 08:40 AM #7
- Join Date
- Aug 2010
- Posts
- 1,138
- Thanks
- 391
- Thanked 166 Times in 118 Posts
Bump
I know there's someone here with a dead 360, or knows someone with one. They have over 40% failure rate.
this IS a General Motors product and the general rule is that nothing should make actual sense.This message was sent from my 2012 Cadillac CTS Originally Posted by pwmin
who knew a pansy-ass 2.8L V6 would sound so glorious
Reply With Quote
